Mud Flaps...

For the other old guys that don't want chips, I just installed the super thin ZL1 mud flaps. Besides working on the ground install was easy and I didn't have to remove tires.

Also installed 3M PPF on both rockers. Rocker PPF is an easy install... unlike the front end which is a mother

I think I'm going to pick up a set of these today. The rocks I'm finding wedged in that area makes me cringe

I've had the ZL1 Splash Guards installed for about 3 months now and they're holding up very well....

Initially the instructions were incorrect and they also were sending out the wrong hardware...Just make sure you use the correct black screws for the rear guards and plastic replacement rivets for the fronts and the install should go fairly easy...I did not have to remove the rear wheel but that's because I used a 90 degree phillips wrench...

I also don't think I'd want the splash guards any narrower (that's if your installing these for protection), particularly if your planning on running 13~15mm spacers...They're doing exactly what they are supposed to do...Since install I don't get splash ups and have not had any rock chips...

New guy here - was thinking the same thing about the mud flaps. Where did you pick them up?

Thx in advance

Lil Grey Supra said:

New guy here - was thinking the same thing about the mud flaps. Where did you pick them up?

Thx in advance

Click to expand...

ZL1 Splash Guards

perfect - thank you. Ordering now!

Lil Grey Supra said:

perfect - thank you. Ordering now!

Click to expand...

Here is a thread below that has more details and discussion regarding these splash guards :

Splash Guards

Installed - no fitment issues on the 2021. Protected paint - I'm happy.

Cldrigid said:

For the other old guys that don't want chips, I just installed the super thin ZL1 mud flaps. Besides working on the ground install was easy and I didn't have to remove tires.

Also installed 3M PPF on both rockers. Rocker PPF is an easy install... unlike the front end which is a mother

Click to expand...

Was drilling involved or just clips ands 3M tape? Another post mentioned screws. Was that just a R&R?

There are screws vs plastic rivets in the rear. New ones from zl1 are perfect. No issues.

And NO drilling

Lil Grey Supra said:

There are screws vs plastic rivets in the rear. New ones from zl1 are perfect. No issues.

Click to expand...

Thanks, just saw the CarGuy’s install video. Looks simple enough.

Take it easy when tapping in the center piece of plastic rivet on the front......easy to bend it then ur kind of screwed. Many small taps as opposed to a couple big ones will win the day.

Here is a video I just put together showing my install of these:

I have been delaying installing these and realized that I lost the plastic rivets for the front that came with the ZL1 flaps. Does anyone now what rivet size is recommended? I see it is recommended to go a little longer than stock but cant find the stock size...