What did you do to your Supra today?

wolf_kyle · Jul 27, 2020

mjonesjr8 said:
do you have details and instructions for the extra usb and 12v cigarette plug on the back. All with no cutting/drilling? Thanks

https://www.supramkv.com/threads/fuse-panel-layouts.5741/page-2

let me know how else i can help you out with

JRedMKV · Jul 27, 2020

puzzled said:
Also fixed the "V" Eventuri decal that was out of alignment from the factory on my engine cover.

I was looking at my picture from yesterday and was puzzled why my engine cover looked like it was pointing towards the passenger side. It was the V logo.. Got it perfectly straight now.

Hi...….I'm thinking about getting this Eventuri intake and engine cover also. What do you think about it and are they well built, high quality parts and craftsmanship? Does the engine cover have some kind of support built into it? I'm kind of worried that the heat from the engine will make it soft and deform. I'd appreciate some details before I spend over $2000 on these parts. Thanks!

wolf_kyle · Jul 27, 2020

Dreamtalon91 said:
Hi...….I'm thinking about getting this Eventuri intake and engine cover also. What do you think about it and are they well built, high quality parts and craftsmanship? Does the engine cover have some kind of support built into it? I'm kind of worried that the heat from the engine will make it soft and deform. I'd appreciate some details before I spend over $2000 on these parts. Thanks!

i may be mistaken, but i believe the Eventuri engine cover uses the inside parts of the OEM engine cover, so youd just have to transfer the parts to the new one. i may be mistaken.

tadda · Jul 27, 2020

Suprassata said:
awesome thanks! I’ve been wanting to disable without BimmerCode due to warranty issues. Now to buy some t-bits.

Disabling Active Sound Design without Coding

puzzled · Jul 27, 2020

Dreamtalon91 said:
Hi...….I'm thinking about getting this Eventuri intake and engine cover also. What do you think about it and are they well built, high quality parts and craftsmanship? Does the engine cover have some kind of support built into it? I'm kind of worried that the heat from the engine will make it soft and deform. I'd appreciate some details before I spend over $2000 on these parts. Thanks!

It's a nice unit. My Supra is a garage queen so I bought these totally unnecessary pieces for bling factor. The craftsmanship is very good, fitment is also very good.

The intake was easy to install (mainly it took me a while to remove the stock unit, but once that was off the Eventuri went in smoothly.

The engine cover uses the factory foam pieces you would remove from your factory cover. This is very easy to install. The only 2 things that were very UK-like as far as quality was the "V" decal. It was off center on mine so I removed it and realigned it. Looks perfect now.. and the missing hardware. Missing a few screws, but I have all sorts of screws so no problem.

No regrets. Each time I open the hood to hook up my battery tender I admire the intake, engine cover, and the black BMS tower brace I added later.

puzzled · Jul 27, 2020

Out with the old (IND one)

Used magnet tool and VHB tape..

In with the new.. I like this one (Goldenwrench) so much more as it goes with the theme of the interior better.

MyCorolla · Jul 27, 2020

wolf_kyle said:
emblem change. "its different"

thoughts?

Is that your own design? How did you make it? I like the idea... I think it needs to be simpler, easier to read.

I've been looking for a replacement because the Toyota emblem is not only outdated, it reminds me of Woody from Toy Story. It is by far the thing I like the least about the Supra.

Meanie · Jul 27, 2020

MyCorolla said:
Is that your own design? How did you make it? I like the idea... I think it needs to be simpler, easier to read.

I've been looking for a replacement because the Toyota emblem is not only outdated, it reminds me of Woody from Toy Story. It is by far the thing I like the least about the Supra.

That’s the old school Toyota logo

JRedMKV · Jul 27, 2020

puzzled said:
It's a nice unit. My Supra is a garage queen so I bought these totally unnecessary pieces for bling factor. The craftsmanship is very good, fitment is also very good.

The intake was easy to install (mainly it took me a while to remove the stock unit, but once that was off the Eventuri went in smoothly.

The engine cover uses the factory foam pieces you would remove from your factory cover. This is very easy to install. The only 2 things that were very UK-like as far as quality was the "V" decal. It was off center on mine so I removed it and realigned it. Looks perfect now.. and the missing hardware. Missing a few screws, but I have all sorts of screws so no problem.

No regrets. Each time I open the hood to hook up my battery tender I admire the intake, engine cover, and the black BMS tower brace I added later.

Thanks for the info. Yeah mine is kind of a garage queen too. I don’t drive it as much since I started working from home, but I do love adding all these pieces to bling it up as well. If what I add boosts the power and performance then that’s a bonus to me. I haven’t started adding actual performance parts yet. This intake would be the first.

Nonschlont · Jul 27, 2020

Fitted these lil guys on. Guess I'll find out tomorrow if they work..
Ams. Fitment is spot on and cf weave looks clean (both pieces)

Supra Werty · Jul 27, 2020

How does it sound?

tadda said:
Disabling Active Sound Design without Coding

Tsar · Jul 28, 2020

Nonschlont said:
Fitted these lil guys on. Guess I'll find out tomorrow if they work..
Ams. Fitment is spot on and cf weave looks clean (both pieces)

They definitely do. You can drive with your windows down with no issues now. Pretty nice at this time of the year.

wolf_kyle · Jul 28, 2020

MyCorolla said:
Is that your own design? How did you make it? I like the idea... I think it needs to be simpler, easier to read.

I've been looking for a replacement because the Toyota emblem is not only outdated, it reminds me of Woody from Toy Story. It is by far the thing I like the least about the Supra.

I got it done from

@rockpaperstickers on Instagram, i get all my decals from him.
nice guy and will tend to your needs

its a black vinyl and the old school TEQ toyota logo on top.

nibble · Jul 28, 2020

wolf_kyle said:
I got it done from

@rockpaperstickers on Instagram, i get all my decals from him.
nice guy and will tend to your needs

its a black vinyl and the old school TEQ toyota logo on top.

That is toyota in Japanese.

トヨタ

wolf_kyle · Jul 28, 2020

nibble said:
That is toyota in Japanese. トヨタ

the more i know! haha i dont want to lie and say i knew that. but i shouldve known :doh:

thanks

What did you do to your Supra today?

wolf_kyle

Well-Known Member

JRedMKV

Well-Known Member

wolf_kyle

Well-Known Member

tadda

Well-Known Member

puzzled

Well-Known Member

puzzled

Well-Known Member

MyCorolla

Well-Known Member

Meanie

Well-Known Member

JRedMKV

Well-Known Member

Nonschlont

Well-Known Member

Supra Werty

Well-Known Member

Tsar

Well-Known Member

wolf_kyle

Well-Known Member

nibble

Well-Known Member

wolf_kyle

Well-Known Member

Similar threads