Search results

~ Damn no unicorn here. 😊

~ I was able to pull up on the ecu and determine the date. See below. Locked or unlocked?!? Looks to be dated 6/29/20

My 2021 has a build date of 7/20... would you believe it to locked or unlocked?

~ Okay. Must I disconnect the battery to do so? Also is it fairly easy to pull up on the ecu once the plastic cover is removed? Thanks

Question... Can one determine the ecu date stamp without pulling the ecu out? Thanks My 2021 has a build date noted in the door jamb of 7/20. Wonder if mine is locked?

~ Yes I agree the plastic pins were a pia. After screwing around with them (bending)... I elected to head to ace hardware and purchased small metal dowel pins (perfect fit) and they easily tapped in place with a small hammer. Very secure.

~ Well after seeing the differences in material compounds & dust reduction ... I elected to switch from the Z16 (low dust) to the Z26 (near zero dust) pads. I installed the front ones tonight and will report back once I put some miles on them. Awaiting the matching rears to arrive. I’ve added...

55k for the car and 10k for wheels. That’s quite the percentage for a set of wheels. No thanks!

~ imo the best $60 one could spend ... if they care about their cars paint!

~ Mine fit perfectly... I wonder if I received revised hardware?

~ where are you located? Can you do $500 shipped to 43065 - Ohio?

~ I made an overlay option...

~ So what’s the realistic horsepower the ‘21 3.0 Supra makes? A true 450hp?

~ what a joke!

~ I agree... there has to be some small changes to the 2022. Improvements somewhere, exterior or interior color changes, etc. Perhaps they are not significant enough to publish just yet.

Thank you for the complement. I’m very happy with the end result. One would be hard pressed to not think this was a factory accessory. The top is held in place with heavy duty Velcro to the underside of the factory aluminum bar. The 3/4” wide Velcro fits perfectly to the indentation underneath...

Thank you for the complement. I’m very happy with the end result. One would be hard pressed to not think this was a factory accessory. The top is held in place with heavy duty Velcro to the underside of the factory aluminum bar. The 3/4” wide Velcro fits perfectly to the indentation underneath...

~ I did the same. Storage is very limited in the Supra ... nice to have the added space for other uses.

~ now to the revised fitted cover...

Any photos of it on the car?