Search results

Interesting, and this is what your front looks like installed correct?

Haha you gave me quite the scare. I really did not want to take those out again.

Yah I'll be lowering the rear a bit for sure. Is your front at the max height as well?

What exactly is installed incorrectly?

I've driven the car roughly 50 miles since install now and the rear still looks too high.... I set the front to max height and set the rear spring height adjuster roughly to the middle of the collar. The front looks pretty much perfect but the rear height is still a bit too high. Has anyone else...

Yup, here you go.

Bump, down to just the Enkei wheels.

I also can't figure out a way to get the app to launch automatically for me. Not sure what I need to change.

Yah I'm in Canada so my local tire shop was able to get me the FAST FC08's very easily. I did order some Dinan 8mm spacers for the front.

Same here

OPE FF06 18x10 +30 = 28lbs I initially thought these would be a nice cheap alternative to Apex Flow Formed Wheels (SM10) as these OPE wheels are also flow formed, but they are not. They are boat anchors 😄 Another affordable, light & flow formed staggered option for folks is this: Fast FC08...

For anyone installing MSS Springs I found these videos to be quite helpful. The MSS Instructions leave a lot to be desired. Not MSS Specific but a very solid guide for how to do springs on these cars. Includes torque specs. Be sure to note the orientation of the upper rubber isolator piece...

I did end up rotating it a touch more to try to get it to sit a bit straighter. No, I removed the OEM rubber perch as per the MSS instructions. I don't like the metal on metal either, but it's what's called for. Really sick of disassembling it so I may leave it as is for the season and get the...

That little white triangle is not in the same spot on the other side (pass side). I used this point where the spring contacts the rubber and rotated it as you suggested; frontwards and 25° inboard of center on the drivers side and rearwards and 25° inboard of center on the passenger side and...

To measure ride height I did the following, before lifting the car, it's a decent baseline. 1. I put small dots of red paint on my garage floor where the tires are in contact with the floor (so I always park in the same spot for future ride height measurements). This might be overkill but my...

Thanks Strat-Supra, I had no idea, is there a corresponding mark on the chassis that those white triangles should line up with in the rear? To be clear, this is what you meant right?

Well I got my MSS springs and Verus camber plates installed. The MSS Instructions are not overly helpful, thankfully there are some half decent YouTube videos that really helped. I was trying to set a ride height that was marginally lower than OEM but I was not successful. On the front I went...

I got a deal on some 18x9.5F and 18x10.5R wheels I just couldn't pass up, so I'm running a 255/35/18 and 275/35/18 staggered tire for this season, along with some MSS Springs and Verus Camber plates. Assuming you meant 275/35/18, not a 275/30/18?

Enkei GTC02 18x9 +25 = 21.4lbs Enkei GTC02 18x10 +35 = 21.9lbs

I hate to quote an old post but I'm just debating on tires for this year, hoping to do about 6 track days and 2-3 autox events. Kind of torn between the new RT660+ and the Vitour P1 but also considering something that will last a bit longer, which brings the V730 into contention. Speaking of the...