Lowering Springs in 2.0?

[Ben22]

What kind of springs do you have in your 2.0?

Sponsored

 

[Probaholic1]

Swift Spring R from the 3.0

 

[SupraMKV2.0]

H&R

 

[Sub-MkV]

Swift Spring R from the 3.0

You have a pic of that? I bought some springs that lowers the car the exact same drop as Swift but I've never seen the springs on a 2.0 with our slightly higher(.2)height over the 3.0.

 

[Probaholic1]

You have a pic of that? I bought some springs that lowers the car the exact same drop as Swift but I've never seen the springs on a 2.0 with our slightly higher(.2)height over the 3.0.

Let me upload some to IMGUR, it doesn't look low, but since I'm in 18". The car sits extremely low.

 

[Sub-MkV]

Let me upload some to IMGUR, it doesn't look low, but since I'm in 18". The car sits extremely low.

Do you think the sway bars for the 3.0 will work on the 2.0? I would think that should be the same

 

[Probaholic1]

Do you think the sway bars for the 3.0 will work on the 2.0? I would think that should be the same

Yup sure does.

 

[Crsupra]

What kind of springs do you have in your 2.0?

im running BC racing coils on my 2.0 worked perfect

 

[Islindur]

Do you think the sway bars for the 3.0 will work on the 2.0? I would think that should be the same

They will coz 3.0 and 2.0 has same sway bar size front and rear

As for springs Id use BMW 30i ones from Z4, the 3.0 Supra onea has different load values to account for more weight.

 

[mboret]

They will coz 3.0 and 2.0 has same sway bar size front and rear

As for springs Id use BMW 30i ones from Z4, the 3.0 Supra onea has different load values to account for more weight.

That’s a very good point. I am trying to figure out if there are 2.0 specific springs / suspension parts that account for the weight difference. As you said the load values should match weight.

 

[Yellow Baloon Man]

That’s a very good point. I am trying to figure out if there are 2.0 specific springs / suspension parts that account for the weight difference. As you said the load values should match weight.

The EUDM Eibach Pro Kit (2.0 specific) .

I should get mine installed in the next 2 weeks or so along with the whole Eibach swaybar kit, so I can post pics after that.

 

[mboret]

The EUDM Eibach Pro Kit (2.0 specific) .

I should get mine installed in the next 2 weeks or so along with the whole Eibach swaybar kit, so I can post pics after that.

Would be great to hear your feedback. Do you have a part number for the EUDM Eibach Pro Kit (2.0 specific)? I looked but was unable to find.

 

[Yellow Baloon Man]

Would be great to hear your feedback. Do you have a part number for the EUDM Eibach Pro Kit (2.0 specific)? I looked but was unable to find.

I double checked and it turns out the dealer in Germany where I bought it from has tried the Eibach Pro Kit Pt.No. E10-20-046-02-22 on booth the 2.0 and 3.0. It appears that it is actually developed for the 3.0 model and not 2.0 specific, but works well with the 2.0. He also wrote me that he is very zufrieden with his results haha

I am still waiting for my Eibach anti roll bar kit to arrive, and then I will lower the car along with installing the springs. I will comment more when I install everything.

 

[mboret]

I double checked and it turns out the dealer in Germany where I bought it from has tried the Eibach Pro Kit Pt.No. E10-20-046-02-22 on booth the 2.0 and 3.0. It appears that it is actually developed for the 3.0 model and not 2.0 specific, but works well with the 2.0. He also wrote me that he is very zufrieden with his results haha

I am still waiting for my Eibach anti roll bar kit to arrive, and then I will lower the car along with installing the springs. I will comment more when I install everything.

Thanks for the update. So far, the only springs that I found to be specifically developed for the 2.0 are AC-Schnitzer. https://www.ac-schnitzer.de/en/toyo...t-for-toyota-gr-supra-2.0/?number=31324&c=425

Its more expensive than Eibach or H&R, but I will more than likely go with this spring kit.

 

[Thraxbert]

Any of the 3.0 springs will work fine with the 2.0, but the car will ride slightly higher than stated as the engine is lighter. "Higher" is around 7mm. No need to look for EUDM or 2.0-specific springs.

Sponsored