Maxton lip kit installed

[Vexeclipse2007]

Love this kit. Looks super clean

Sponsored

 

[VA90]

Looks great. I have the V.3 sitting in my garage. Did you have a body shop install it or DIY? Seems really straightforward--I just don't have the equipment handy to do it.

 

[Vexeclipse2007]

Looks great. I have the V.3 sitting in my garage. Did you have a body shop install it or DIY? Seems really straightforward--I just don't have the equipment handy to do it.

Didnt have time to do myself. Paid the $100 to have someone do it

 

[BA9092]

Looks great. I have the V.3 sitting in my garage. Did you have a body shop install it or DIY? Seems really straightforward--I just don't have the equipment handy to do it.

If you have ramps or jack stands, you're set. The only drilling required is on the lip itself. It uses the existing pop-clips and screws that are already on the car as well as the ones they supply you for a more secure fit.

 

[nibble]

Maxton lip are fairly simple to install. however, I felt that it is prone to scratch so I wrapped it before installing it.

https://www.supramkv.com/threads/my-pewter-supra-build-log.5904/post-144476

https://www.supramkv.com/attachments/20210723_191006-jpg.47844/

 

[Loco38SUP]

How did you guys manage the nylon lock nuts behind the stock splitter. Mine were a pain in the ass! I used an open ended wrench wrapped in electrical tape to hold the nut. Then a small mirror and a flash light to line it with the stock holes.

I used all new hardware with it, see pic. Those pop clips don’t do much at 135+ mph.

-RJM

 

[Loco38SUP]

Didnt have time to do myself. Paid the $100 to have someone do it

Curious to see how they attached it for only $100.

-RJM

 

[jbretthorton]

Where to purchase these kits in the US?

 

[VA90]

Where to purchase these kits in the US?

www.maxtondesignusa.net

 

[HaiFrends]

Kit looks real clean ?? Love the color on the rims too.

Sponsored