Mimosa's [Schwarz Silber] Build

Mimosa

Well-Known Member
Joined
Oct 12, 2020
Messages
203
Reaction score
297
Location
North Carolina
Website
www.instagram.com
Car(s)
J29
***Updated 08/02/2021***

April Snapshot:
GR Supra 02-Enhanced.jpg
GR Supra 03-1-Enhanced.jpg
GR Supra 04-Enhanced.jpg
20201015_163701.jpg




Parts Installed:
  • Engine/Intake/Exhaust
    • Verus Air Oil Separator (Raw)
    • Verus AOS Drain/Crank Case Vent line Kit
    • Verus 6 port Heat Shield (Black)
    • AMS Charge Pipe
    • MST V2 Intake System
    • Remark Catback Exhaust
    • AA Catted Downpipe
  • Suspension/Brakes
    • RS*R Best-i Active Coilover
    • Visconti Ride Height Sensor Bracket Upgrade
    • R1 Concepts Big Brake Kit- 6 piston front and 6 piston rear with E-brake
    • 13 and 15 mm Spacers (To hold me over until my wheels get here)
    • Cusco Strut Brace
    • MRG 82mm Stud Conversion Kit
    • Customized Allstar Performance Spring Perch Spacer
  • Fueling/Tuning
  • Drivetrain
  • Aero/Interior & Exterior Aesthetics
    • Verus Washer Fluid Cap (Raw)
    • Verus Engine Bay Cap Kit (Raw)
    • Verus Gas Cap (Black)
    • Verus A/C Cap Kit (Black)
    • AMS Engine cover
    • AMS ECU cover
    • AutoTecknic Carbon Mirror Cover (Will be painted Matte Clear)
    • AutoTecknic Paddle Shifters
    • Full Alcantara Steering Wheel with A91 stitching from ECS

Current parts that I have on hand:
  • Zl1 Rock Guards
  • P2uned Door Garnish
  • SCS Custom Plaque
  • STREETHUNTER Wing
  • EOS Intake/Intercooler Manifold
  • SPL Front Lower Control Arm
  • Visconti Tuning STG1 Fuel System Upgrade
  • Visconti Tuning Sequential Port Injection Kit
  • Visconti Flex Fuel Kit
  • ID1050x injectors
  • ECU Unlock
  • EcuTek Custom Tuning Credits
  • Cusco Trunk Brace

Items that are currently on order:
  • Seibon MB Diffuser
  • Seibon MB Skirts
  • Seibon MB Front Lip
  • Seibon TSII Hood
  • 20" SSR SP1 Wheels (Glossblack barrel, matte black face, Silver hardware)
    • 20x9.5 and 20x10.5
  • Michelin PS4S Tires
    • 275/30 and 305/30
  • INGS +1 N-Spec Front Aero Fenders

Future orders
  • Pure 850 Rebuild
  • Pure Stage 1 Transmission and Torque Converter Rebuild
  • Guibo, Driveshaft, and Axle upgrades
  • More SPL Suspension components





Advertisement

 
Last edited:

Octane

Well-Known Member
First Name
Jack
Joined
May 27, 2019
Messages
186
Reaction score
157
Location
Chicago
Car(s)
'21 Supra.
That's quite the list of mods you got there already. Enjoy!
 

jchall30

Well-Known Member
Joined
Aug 31, 2019
Messages
261
Reaction score
186
Location
KY
Car(s)
2021 Toyota Supra A91 Refraction 2021 Lexus UX250H
Love the big brake kit!! That’s badass
 

Suggs.OR

Well-Known Member
Joined
Jun 17, 2020
Messages
330
Reaction score
402
Location
Oregon
Car(s)
Nocturnal 2021 Supra 3.0 Premium
Vehicle Showcase
1
Found who is stealing all the available parts. Excited to watch this build. You will have to let me know what you think of the rear zl1 mud flaps works with being lowered. I only used the hks springs but they were scraping on big bumps.
 
OP
OP
Mimosa

Mimosa

Well-Known Member
Joined
Oct 12, 2020
Messages
203
Reaction score
297
Location
North Carolina
Website
www.instagram.com
Car(s)
J29
Found who is stealing all the available parts. Excited to watch this build. You will have to let me know what you think of the rear zl1 mud flaps works with being lowered. I only used the hks springs but they were scraping on big bumps.
That is one concern of mine as well. I'll keep you posted.
 

Kiske

Well-Known Member
Joined
Jan 17, 2021
Messages
74
Reaction score
59
Location
KC
Car(s)
1988 FC3S, 2015 Evo X FE, 2018 tS, 2021 A90 3.0
Might suggest wrapping the carbon interior bits instead of painitng them matte black. Easier to maintain when scratched or scuffed and easily reversable.
 

Akashugly

Well-Known Member
First Name
Akash
Joined
Nov 17, 2020
Messages
64
Reaction score
52
Location
Dubai
Car(s)
2021 Toyota Supra
I'm deciding to name this car after the black and silver color scheme that I'm going for with the exterior and engine bay. I'm using the Nocturnal A91 as a base. I am currently not focused on performance mods since the car is currently locked and I do not want to use a piggyback. Eventually I would like to get to that. I'm looking to keep all the systems in the car as functional.


Here's some before pics that I took (I'm not a photographer so bare with me):

GR Supra 02-Enhanced.jpg

GR Supra 03-1-Enhanced.jpg

GR Supra 04-Enhanced.jpg



Current parts that I have on hand:



RS*R Best-i Active Coilover:

View attachment 41442




R1 Concepts Big Brake Kit- 6 piston front and 6 piston rear with E-brake:

View attachment 41444




13 and 15 mm Spacers (To hold me over until my wheels get here):

View attachment 41445




Zl1 Rock Guards:

View attachment 41446




Cusco Strut Brace (The Blue will be painted black.)

View attachment 41447




Items that are currently on order:

  • AMS Catted Downpipe
  • Remark Catback Exhaust (I will be polishing the Tip covers to remove the burned in look)
  • Seibon MB Diffuser
  • Seibon MB Skirts
  • Seibon MB Front Lip
  • Seibon TSII Hood
  • Street Hunter Wing
  • P2uned Door Garnish
  • 20" SSR SP1 Wheels (Glossblack barrel, matte black face, Silver hardware)
    • 20x9.5 and 20x10.5
  • Michelin PS4S Tires
    • 275/30 and 305/30

Items looking to order soon:
  • AMS Charge Pipe
  • Ind Front and rear reflector set
    • I'm also thinking of just putting matte black Vinyl there as accent pieces. And it would also be cheaper
  • Intake System (Still trying to decide on one)
  • Stud kit
  • Verus Engineering Engine dressings (all in black)
  • Dash Cam

Future items after ECU is unlocked:
  • Pure 850 Rebuild (possibly have done even if the ECU is still locked)
  • Pure Stage 1 Transmission and Torque Converter Rebuild (possibly have done even if ECU is locked)
  • Engine internals upgrade
  • Tune

If anyone has any suggestions or input please feel free to let me know.

***All carbon Fiber pieces will be painted matte black with the exception of the door garnishes which will be painted Nocturnal. I also received matte black mirror caps for my car so I won't be painting the carbon fiber ones.***
Sounds like an awsome build!
Cant wait to see the seibon goodies going on. I have them on order too and been a couple of months now!
 
OP
OP
Mimosa

Mimosa

Well-Known Member
Joined
Oct 12, 2020
Messages
203
Reaction score
297
Location
North Carolina
Website
www.instagram.com
Car(s)
J29
Might suggest wrapping the carbon interior bits instead of painitng them matte black. Easier to maintain when scratched or scuffed and easily reversable.
I'll actually try to get some quotes this week and weigh wrapping vs. Painting. The hood and door garnishes I definitely want painted.

Sounds like an awsome build!
Cant wait to see the seibon goodies going on. I have them on order too and been a couple of months now!
Hopefully you'll get yours soon. I'll be waiting a few months as well. How long have you been waiting so far?
 

Akashugly

Well-Known Member
First Name
Akash
Joined
Nov 17, 2020
Messages
64
Reaction score
52
Location
Dubai
Car(s)
2021 Toyota Supra
I'll actually try to get some quotes this week and weigh wrapping vs. Painting. The hood and door garnishes I definitely want painted.



Hopefully you'll get yours soon. I'll be waiting a few months as well. How long have you been waiting so far?
I have been waiting 10 weeks now, 2 weeks left is what they say but I wouldn't be too sure. In all these weeks of waiting i start wondering if i should have picked something else haha
 
OP
OP
Mimosa

Mimosa

Well-Known Member
Joined
Oct 12, 2020
Messages
203
Reaction score
297
Location
North Carolina
Website
www.instagram.com
Car(s)
J29
I have been waiting 10 weeks now, 2 weeks left is what they say but I wouldn't be too sure. In all these weeks of waiting i start wondering if i should have picked something else haha
It's almost like that for most big ticket items now. More than likely you'd be experiencing these wait times with other kits. Very few are readily in stock.
 

Msoupe

Active Member
First Name
Aaron
Joined
Feb 10, 2021
Messages
44
Reaction score
35
Location
California
Car(s)
'21 Supra 3.0, Civic Hatch, C10 Pickup
Received the MRG 82mm Stud conversion kit with and they look amazing and was not expecting them to feel so light. I got these for the SSRs but I'm going to go ahead and throw them on the stock rims.

MRG STUD-3.jpg


MRG STUD-1.jpg


MRG STUD-2.jpg
Nice! I wish I knew about these before purchased my extended wheel studs. Looking them up, the price seemed pretty reasonable for titanium studs and nuts.
 

Advertisement





 


Advertisement
Top