Mods done so far... to my 2024 Tacoma Off-Road with Premium Package

[Goriders]

Sweet ride TacoNate.

Bravo

Sponsored

 

[TacoNate8797]

Sweet ride TacoNate.

Bravo

Thanks man

 

[TacoNate8797]

I feel that man. I’ll probably have a setup that weighs around 75-80 lbs max. Either 285/70 or 285/75

Yeah I kept the old tires and wheels and gonna weigh them to see the difference between my new wheels and tires. Will keep u posted

 

[Mykale220]

Well here are some of the mods that I have done to my 2024 Tacoma Off-Road

-added Falken Wildpeak ATW4 tires (285/70/R17)
-Icon Rebound Pro wheels +25mm offset
-Toyota Tacoma Black chrome exhaust tip
-Limo tint
-plasti-dip the chrome toyota emblem
-Beat-Sonic plug-in-play amplifier (the premium JBL audio was ok, but this gave it some pop)
-Have Westcott designs preload collar lift kit on order

-

(the link show the video of my truck install)

Hi brother, how’d you go about plastidipping the Toyota emblem? I wanted to do the same but had not done it before.

 

[TacoNate8797]

Hi brother, how’d you go about plastidipping the Toyota emblem? I wanted to do the same but had not done it before.

Hey Bro,
So I pulled off the silver toyota logo, cleaned it, then cleaned it again with some alcohol wipes. Put the logo on some cardboard and did a light coat with Behr black gloss plasti dip spray paint. You can get it at Lowes or Home Depot for about 10 bucks. Once the original light coat dried I sprayed a heavier coat. Then I let it dry for an hour, then sprayed it again and let it dry for an hour. I then flipped it over and did a couple of coats and it was good to go. Hope that info helps.

 

[Mykale220]

Hey Bro,
So I pulled off the silver toyota logo, cleaned it, then cleaned it again with some alcohol wipes. Put the logo on some cardboard and did a light coat with Behr black gloss plasti dip spray paint. You can get it at Lowes or Home Depot for about 10 bucks. Once the original light coat dried I sprayed a heavier coat. Then I let it dry for an hour, then sprayed it again and let it dry for an hour. I then flipped it over and did a couple of coats and it was good to go. Hope that info helps.

Thank you sir, sorry I do gun coatings and In my mind I some how thought it would be much more involved

Sponsored