What size spacers...

[084runnerltd]

Title says it all....I am looking for spacers, what size do you recommend?

Burger Tuning is advertising 10mm and 13mm, I take it I get one set of each and the 10mm is for the front...?

Sponsored

 

[HATED1]

If you are looking to be flush with the fenders I believe 18mm is the way to go. Check out Duspeed on instagram. He is running 18mm H&R spacers if I am not mistaken.

 

[larrymz3]

Has anyone installed the Burger Motorsports spacers?

 

[RenierR10]

Has anyone installed the Burger Motorsports spacers?

I get mine tomorrow. I think they might be too small though. Specially in the rear. Well see.

 

[larrymz3]

I get mine tomorrow. I think they might be too small though. Specially in the rear. Well see.

Ok good deal! Please let us know - I was about to order!

 

[084runnerltd]

Ok good deal! Please let us know - I was about to order!

Installed mine this morning, I didn’t grab a pic of the front, but I think the rears look good.


Stock:

13mm Burger Spacers:

FYI, my standard floor jack worked. I used the BMW spacer/adapter (as seen in the photo) but I was happily surprised that I didn’t need to buy a low-profile jack.

 

[kona61]

I stalled mine this morning, I didn’t grab a pic of the front, but I think the rears look good.


Stock:

13mm Burger Spacers:

FYI, my standard floor jack worked. I used the BMW spacer/adapter (as seen in the photo) but I was happily surprised that I didn’t need to buy a low-profile jack.

Was it tight? I can't image there's much space under the jacking points.

 

[084runnerltd]

Was it tight? I can't image there's much space under the jacking points.

The rear was an easy fit, the front jackpoint was pretty close, but still had about a 1/2” of extra space.

The floorjack is about 20 years old, it is just a standard Sears jack. I am guessing if mine fit, most others (unless oversized heavy duty) will fit, as I am assuming these things got smaller and stronger over the past 2 decades.

 

[Fast_Freddie]

How does it look after the rear settled back down a bit?

 

[HATED1]

@084runnerltd How do you like them? Do they sit flush or are they too aggressive? Any effects on steering/drivability?

 

[084runnerltd]

How does it look after the rear settled back down a bit?

Looks good, I would not consider myself a wheel expert by any means, but I am happy with them. (I will post some more pics tomorrow)

@084runnerltd How do you like them? Do they sit flush or are they too aggressive? Any effects on steering/drivability?

I am happy with them.

The stick out a very small amount, but definitely not too aggressive. I have noticed zero affect on steering/drivability.

I am not into crazy/extreme mods, my goal was to improve the look, without it being obvious that there are spacers added. I am pleased with them.

Earlier in this thread someone mentioned 18mm, I think that may be a little much. For sure too much if your goal is to be flush with the fender line, as you can see mine stick out a small amount...

 

[HATED1]

@084runnerltd looking forward to seeing those pics!

 

[RenierR10]

I finally got my the Burger spacers on. I forgot to take stock pics lol it was dark anyway . There’s plenty of stock pics online. Also I’m not the best photographer but you can get an idea at least.

 

[HATED1]

@RenierR10 Nice! I assume it's 10mm in front and 13mm rear?

 

[RenierR10]

@RenierR10 Nice! I assume it's 10mm in front and 13mm rear?

Yessir, that’s correct.

Sponsored