Revel GT Dry Carbon Door Switch Panel

[Launch7]

Has anyone purchased the Revel carbon door switch panel?

More Japan > GT Dry Carbon > Revel GT Dry Carbon Door Switch Panel Set for 20-20 Toyota Supra (more-japan.com)

If so, how is the quality, fit , and match with the existing cf? Is there any issue's with fitment on the side view mirror switch like on the OLM switch panel?

Sponsored

 

[SuupYota]

I would be interested also. I had the OLM one with all the issues haha. From what I can tell in that photo, it looks to have possibly the same fitment issues. The window side mirror two buttons look the same size, where the right most needs to be slighter longer to accommodate a slide. In addition to the issues I had listed, the carbon is too thick in the cutout where the window down button is. It makes getting your finger under super tight, and you practically have to use yr fingernail to function the window button.

 

[AlRayes_BRN]

Personally ill keep the piano black door cover, it matches the center switch pa el piano black interior very well. The only parts that ill change to CF are the black matte plastic parts.

 

[Launch7]

I would be interested also. I had the OLM one with all the issues haha. From what I can tell in that photo, it looks to have possibly the same fitment issues. The window side mirror two buttons look the same size, where the right most needs to be slighter longer to accommodate a slide. In addition to the issues I had listed, the carbon is too thick in the cutout where the window down button is. It makes getting your finger under super tight, and you practically have to use yr fingernail to function the window button.

Yup, just sent my OLM back for a refund. The Revel does look similar in the pic but am interested to see if anyone has actually installed it to see if Revel did a better job with fitment.

 

[Meraki Autoworks]

We haven't seen much out there, we saw this at SEMA and was very interesting. We are a REVEL dealer if you're interested in grabbing a set.

-Josh

 

[Rasengan]

Bump. Anyone have these peices and can comment on fit and finish (i.e. dors it match the OEM CF trim)?

 

[BA9092]

I have the ones from EOS and they fit fine. I did have to take about half a millimeter off the back edge with a Dremel tool, but other than that, no issues.

https://extremeonlinestore.com/coll...-carbon-fiber-center-console-side-panel-cover

Sponsored