Search results

Hey man, I saw your post earlier and it was really helpful, thanks for sharing 🙏 I have a quick question about two tables: • Injection Timing • End of Injection (Warm) I just want to understand them in a simple way: • What do these two tables actually control? • If...

Hi, thanks a lot for your reply. Here are the logs: • Log1: https://www.bootmod3.net/log?id=68a146dabefad1374c0063ff • Log2: https://www.bootmod3.net/log?id=68a3a4093a5c3a1d3e70e1bd • Log3: https://www.bootmod3.net/log?id=68a4fa15eebaaf122a5c5f7f About Log1 vs Log2: Both...

Yeah, that could be a possibility. DA might have played a role here.

Hi, I’d like to get your opinion on something I noticed. With the same tank of fuel, same tune, same day, and similar intake air temps, I saw about a 20 Nm difference in torque between two logs taken just 10+ km apart. The load values were also different. I’ve attached the two log screenshots...

Thanks for the detailed reply! That makes sense. Just a follow-up question — do you usually follow any specific strategy or pattern when tuning AFR across different RPM and load ranges? For example, I see you target around 12.5 or 12.1 in high RPM and high load areas, but what about...

Also, I’m curious about your approach to AFR tuning. Do you have any personal insights or methods you’ve found particularly effective? And in your experience, does running richer AFR for performance have any long-term downsides, like increased risk of carbon buildup or other issues? Appreciate...

Thanks! Just wondering — if I raise or lower the boost target and want to maintain a smooth and well-controlled boost curve, would that typically require adjustments to the Wastegate Position Feed-Forward table and the Compressor Map With Required Compressor / Turbine Output (kW)? Or are there...

Hi! Thanks again for all the great info you’ve shared in this thread — it’s been extremely helpful. I saw the table you posted recently with your changes. Would you mind taking some time when you’re free to explain the significance of the tables you modified and why you made those specific...

Thanks so much for your guidance — it’s been incredibly helpful! I followed your approach and disabled PID control to tune the WGDC Feed-Forward table. I adjusted it so that actual boost closely matches the target without overshooting. Below is a log I captured after disabling PID — you can see...

Hi razorlab, Thanks for the detailed explanation — it’s incredibly helpful! You mentioned that the log screenshot was taken with the dynamic PID boost control disabled, and that it’s a good method to tune the Wastegate Position Feed-Forward table more accurately before re-enabling PID. That...