Sorry for the really late bump, but looking into almost exactly the same wheel setup as you. I'm assuming that the 10.5 along with the Nankang 275's won't clear without the 5mm spacers on the front oem perch, which is why you're using a spacer? Trying to make sure before I pull the trigger on a...
Thank you for the response! It seems that the 275's will clear the fronts, since they recommended it in some of the OEM+ setups. They recommend 18x10 +30's though, rather than 10.5's. Could the half an inch in width in terms of the rim itself cause any issues? Sorry for the ignorant question...
Was just wondering if a square set of 18x10.5 +30, wrapped in 275 tires would clear stock suspension on stock height, or would it cause issues such as rubbing, especially in regards to the front? Just wanted to make sure prior to pulling the trigger on a set of wheels I'm eyeing. Thanks in advance!
You HAVE to drill into the bumper to install canards right? 3M won't cut it, and it'll most likely fall off under high speeds, or can you get away with using 3M? Or does it largely depend on the canard you are planning to install? Mostly interested in the Varis canards. Thank in advance!
Sounds good! Just swapping wheels out so won't be doing anything underneath the car as for now. Will def purchase a set of maintenance ramps in the future though to jack it up from the diff/near oil pan in the future. Thank you for the help!
Hi! Was just wondering if it was okay to jack up the car from the side, using an adapter onto the plastic jack stand points? The jack I have isn't low profile enough to get underneath to the diff/near the oil pan, so was just wondering if it was okay jacking it from just the sides, or will this...
Hi! Sorry to bump a old post of yours, but actually looking at a set of wheels almost exact spec of yours. Did it rub at all, and did you have to run spacers or additional other hardware to make the wheels work? Thanks in advance!
Hi! Yep, I've seen it, albeit through pictures only. 10.5 +33 does sound quite aggressive for the front's though, I think they usually are 9.5 +25 maybe? At least from other wheels specs I've seen. I'll ask him a few more questions once I see them in person though. Thank you for the help!
Hi! Thank you for the reply. Ya it's coming off of a diff supra, and he's throwing in a set of 5mm spacers along with the wheels, but I'm assuming that the spacers are there cause he has a BBK on his car, and it was used to clear those. I personally don't have a BBK on mine currently, but would...
Hi! First post, sorry for the uninformed/stupid question as I'm entirely new to modding cars, but was just wondering if I would need to install some extended studs on a 18x10.5 +35 square set of wheels I'm looking at. Someone is selling locally, just want to be sure what type of hardware I need...