Search results

What side skirt is that? I have adro it’s almost full proof to install. Regardless of the brand or type if you’re bolting it in place it shouldn’t be moving.

Sometimes less is more!

ok got whole Adro kit installed. Here are pics!

Hello..yes..it’s wrapped in white.

Fuck that center piece in the front bumper 😂 couldn’t get the tabs to line up to pull it off for the life of me. Anyways. Full Adro sans wing installed! Good quality and good fitment. Way better than the eBay stuff.

I’m at 565 whp and similar torque for the last 3 weeks and put about 200 miles on it and I haven’t experienced any issues with my clutch fyi.

You’re probably already doing it since you’ve done it before..but if not, make sure you’re kinda pushing in on the airbag while you’re trying to unclip the springs. Start with the one you’re having difficulty with then unclip the other ones. Make sure you’re also not pushing in between the...

All good. I appreciate the feedback. I’m not well versed when it comes to tuning etc. I just gotta trust the people who do the work. Just regurgitating what I was told. I saw some of those post too about the other turbos. Lots of variables..not quite apples to apples..although I was anticipating...

FBO and catless on DAW we did 480whp on 93 and 565 on E35. tuned by Sam. This is a91-mt. For reference. Was hoping for closer to 600 whp but was told Sam didn’t think it was a good idea for anything above 35 or he saw potential knock or some thing. Car pulls smooth and strong all the way to...

You need better tires or did you already upgrade? With more power comes more wheel spin if can't put the power down. I’m on mps4s 305s. Tire temp was about 83 degrees. I hate to change out the tires because they are so new. I will prolly move to M/T SS or Nitto 555r2 when I do.

Weekend update! Did a few pulls in 2nd 3rd and 4th. There was some wheel spinning but car pulls strong all the way to redline. Felt very very smooth and very oem ++ didn’t feel any clutch slipping either. Carry on!

Just repeating what the shop guy told me Sam said as they were tuning.

I didn’t get a base line. I was on stage 2 bm3 with hks intake and hks exhaust and catless dp. Which based off my research is around 440-450 whp. So a little more than 110 whp with ultra flow r and e35. I’m hoping to be happy with this setup for awhile.

I haven’t really driven hard, nor taken it past 4500 rpm. I can tell you I’ve noticed more lag though. But I guess it’s to be expected. Will drive it around Thursday and Friday and report back. I’m happy about the power though per the dyno sheet anyway. It’s exactly the power I was expecting...

What the graph says..sound low to you? It was tuned by Sam..

Just literally got my a91-mt back a few mins ago from the shop . Did the daw ultra r with e35 install and no issues on the way home. Granted I didn’t get on it because the tires were not warmed but my clutch felt fine and the shop didn't mention and clutch slippage when they dyno tuned it nor...

Daw Ultra Flow R installed. Charge pipe and got the flex fuel kit not reading fixed. Requested tune from THE Sam! Super excited!

A lot of assumptions here. Sorry, I have a life outside of these forums and getting the flex kit to work believe it or not is not at the top of my priority list. I have contacted bm3 and they asked me to take pictures of the install. I have not been able to take pictures for them because I have...

From the dec 13th trip? Or did you send direct to Femto?

Hmm. This is helpful even though I’m in BM3 FFk. No codes or anything, not dash lights ..car runs fine. But be bad sensors. I’d imagine if I did bad job wiring, I’d have some kind of issue. Cuz my sensor is reading 0% ethanol.