JRedMKV
Well-Known Member
- Joined
- Jul 1, 2020
- Threads
- 43
- Messages
- 683
- Reaction score
- 670
- Location
- Reno, Nevada
- Car(s)
- 2020 Supra 3.0 Premium
- Vehicle Showcase
- 1
- Thread starter
- #1
I posted this question somewhere else in the forum but I’m not sure anyone is seeing it so I’m reposting it here. Any help would really be appreciated guys.
I’m sure some of you guys here are using the JB4 and have coded your car. Well, I have a weird issue going on. I coded my car to go back to comfort mode as the default when I start her up. I wanted to do this so when my exhaust comes in I can have both modes, comfort and sport. After coding it everything was working fine and the Sport button was opening and closing the valve as it should. I removed the OBDLink MX and tested the button and it was still working. Next I plugged in my JB4 into the obd port and as soon as I did that the Sport button stopped opening and closing the valve again. Anybody experience this as well? Any idea what’s going on?? Please help!
I’m sure some of you guys here are using the JB4 and have coded your car. Well, I have a weird issue going on. I coded my car to go back to comfort mode as the default when I start her up. I wanted to do this so when my exhaust comes in I can have both modes, comfort and sport. After coding it everything was working fine and the Sport button was opening and closing the valve as it should. I removed the OBDLink MX and tested the button and it was still working. Next I plugged in my JB4 into the obd port and as soon as I did that the Sport button stopped opening and closing the valve again. Anybody experience this as well? Any idea what’s going on?? Please help!
Sponsored
