underdonk
Well-Known Member
- Thread starter
- #1
Well folks, I have to sell my ’21 Toyota GR Supra 3.0. It has about 7000 miles on the odometer. After all the blood, sweat, and money I put into this thing – not to mention the fun I had with it – it must go. I’m having a big ol’ spinal fusion surgery in ‘24. This presents a problem because: 1) I won’t be able to get in and out of the car with the race seats due to the bending and twisting that you have to do; 2) Hitting a wall at a track at 100mph would likely cause a redo on the surgery or put me in a wheelchair; and 3) If I kept the car, it would be simply sit for a minimum of 1 year (assuming no surgical complications) during which I will be undergoing recovery. I have a kind of half-hearted build thread here on this site, but let me sum up what I’ve done and post some pictures of the car. The pictures are boring. The car looks completely stock on the outside. No cosmetic mods. It’s just about an inch lower at each corner because of the aftermarket springs. The interior is pretty stripped. There are no dings or dents on the car and no curb rash on the wheels. It sounds like a dragon. I don’t have pictures of all of the mods but can take specific pictures if requested. This is perfect for someone who is looking for something turn-key to get onto the track for an HPDE, hit the drag strip, have fun at autocrosses… or just tear it up on the street. All of the work (minus the basic stuff like the air intake, strut brace, etc.) was done at a local race shop I’ve been going to for 30 years that specializes in BMWs, Porsches, and Mercs. They are legit and the owner and techs are all racers themselves. The shop is Motorsports of Lexington if you’d like to check them out. I highly recommend their services. The car is located in Lexington, KY. II am asking $65k and am willing to negotiate. I will ship the car to you as part of that negotiation. I may wash it, too.
My hope is that it goes to a good owner who will enjoy it as much as I have.
I want to add that this community has been as great as the car. It’s a fun place, though I haven't been very active at all recently.
Modifications:
Cusco front brace
Cusco rear power brace
Cusco front and rear red tow hooks
Verus Engineering master cylinder brace
Verus Engineering turbo heat shield
Verus Engineering motor mounts (stiffest inserts)
AWE Track Edition exhaust
Evolution Racewerks ceramic-coated catless downpipe
LP Performance Co. steering wheel
M Performance carbon fiber shift paddles (the $400 OEM BMW ones from the M-cars)
Burger Motorsports JB4 w/ custom map by @Jesse DaBears
xHP Stage 3 Transmission Flash
All of the common tuning stuff w/ Bimmercode
Fuel-It! Flex Fuel Kit
aFe front & rear sway bars
Eibach EU-spec front and rear springs
Antigravity H7/Group-94R 60 Ah lithium battery
SPL Parts front and rear sway bar end links
SPL Parts traction links
SPL Parts solid aluminum differential mounts
SPL Parts front lower control arms
SPL Parts rear tow links
SPL Parts rear upper camber/lateral and upper traction links
SPL Parts front caster/tension/trailing arm bushings
SPL Parts bump steer front outer tie rod ends
SPL Parts eccentric lockout kit for rear camber and toe arms
Twisted Tuning upgraded transmission mounts
Turner braided stainless steel brake lines
CSG C21/C11 brake pads
MSTv2 intake system (with the older – and better IMO – aluminum turbo inlet pipe)
Custom black powder coated Hochman Fabrication rear brace/harness bar
Bride driver and passenger seat mounts w/ adjustable rails
Sparco EVO L driver and passenger race seats
Sparco 6 point 3in driver and passenger racing harnesses
Yokohama ADVAN A052 tires stock size at all four corners (have about 100 road miles on them)
If I missed any SPL Parts components, it’s because I didn’t see it on an invoice. It has ‘em all.
Honestly I’ve probably forgotten some stuff it has and will update the post if I remember.
Juice:
LiquiMoly 5w-30 Engine Oil
MOTUL RBF 660 racing brake fluid
Extras (not in/on car) that come with it:
Driver and passenger stock seats
Verus Engineering carbon hood louver
Verus Engineering air/oil separator (removed from car)
A91 replica spoiler w/ satin black finish
2 x sets of the SPL Parts front lower control arms cap bolts (these should be installed ASAP)
All of the random extra parts, stock parts, and fluids I have some of I probably can’t remember
Pictures:
This is the actually the most recent picture I have of the car and was the first Z06 I saw in the wild. The Z06 does not come with the car.
My hope is that it goes to a good owner who will enjoy it as much as I have.
I want to add that this community has been as great as the car. It’s a fun place, though I haven't been very active at all recently.
Modifications:
Cusco front brace
Cusco rear power brace
Cusco front and rear red tow hooks
Verus Engineering master cylinder brace
Verus Engineering turbo heat shield
Verus Engineering motor mounts (stiffest inserts)
AWE Track Edition exhaust
Evolution Racewerks ceramic-coated catless downpipe
LP Performance Co. steering wheel
M Performance carbon fiber shift paddles (the $400 OEM BMW ones from the M-cars)
Burger Motorsports JB4 w/ custom map by @Jesse DaBears
xHP Stage 3 Transmission Flash
All of the common tuning stuff w/ Bimmercode
Fuel-It! Flex Fuel Kit
aFe front & rear sway bars
Eibach EU-spec front and rear springs
Antigravity H7/Group-94R 60 Ah lithium battery
SPL Parts front and rear sway bar end links
SPL Parts traction links
SPL Parts solid aluminum differential mounts
SPL Parts front lower control arms
SPL Parts rear tow links
SPL Parts rear upper camber/lateral and upper traction links
SPL Parts front caster/tension/trailing arm bushings
SPL Parts bump steer front outer tie rod ends
SPL Parts eccentric lockout kit for rear camber and toe arms
Twisted Tuning upgraded transmission mounts
Turner braided stainless steel brake lines
CSG C21/C11 brake pads
MSTv2 intake system (with the older – and better IMO – aluminum turbo inlet pipe)
Custom black powder coated Hochman Fabrication rear brace/harness bar
Bride driver and passenger seat mounts w/ adjustable rails
Sparco EVO L driver and passenger race seats
Sparco 6 point 3in driver and passenger racing harnesses
Yokohama ADVAN A052 tires stock size at all four corners (have about 100 road miles on them)
If I missed any SPL Parts components, it’s because I didn’t see it on an invoice. It has ‘em all.
Honestly I’ve probably forgotten some stuff it has and will update the post if I remember.
Juice:
LiquiMoly 5w-30 Engine Oil
MOTUL RBF 660 racing brake fluid
Extras (not in/on car) that come with it:
Driver and passenger stock seats
Verus Engineering carbon hood louver
Verus Engineering air/oil separator (removed from car)
A91 replica spoiler w/ satin black finish
2 x sets of the SPL Parts front lower control arms cap bolts (these should be installed ASAP)
All of the random extra parts, stock parts, and fluids I have some of I probably can’t remember
Pictures:
This is the actually the most recent picture I have of the car and was the first Z06 I saw in the wild. The Z06 does not come with the car.
Sponsored
Last edited: