Search results

System Install Complete (Stage 1)

Update Day 5 7/9/21 Some wiring changes were made to connect the center channel.

They promised to me send all build photos once they are done.

Day 4 Update 7/8/21 We decided to go with a sealed enclosure.

Yeah the shop builds enclosures in their fabrication room to avoid cars getting dirty inside and out. Also allows returning vehicle back to stock.

Day 1 Update 7/5/21 Day 2 Update 7/6/21 Day 3 Update 7/7/21 Got a call from the shop. They found that the oem enclosure is necessary to keep in place as it ties in with a lot of the interior panels and will not add much CU FT to be worth cutting into it. The subs we are...

Yeah that's a lot of equipment. I wanted lighter/simpler setup. I am hoping 500w rms is enough to satisfy my bass needs.

System Install (Stage 1) Vehicle: 2021 GR Supra Premium 3.0 Shop: Handcrafted Auto Marine & Offroad Location: Chandler, Arizona Cost: $5,948.67 Time: 30 hours Shop Rate: $100hr Completion Date: 7/9/21 Equipment Installed: mObridge K2 MOST25 AMP 8.1.1 x1 FOCAL K2 POWER (ES 100 K) x1 FOCAL FLAX...

Audio Build Journal | HELIX | Focal | SoundShield TL;DR Quick Links: System Install (Stage 1) Day 1, 2, 3 Update 7/5/21-7/7/21 Day 4 Update 7/8/21 Day 5 Update 7/9/21 System Install Complete (Stage 1) DSP Tuning 2 Month Review Subwoofer Enclosure Revision Sound Deadening System Install (Stage...

Now that you mentioned you are stock tune I would say don't do any of the things mentioned in the OP.

The Verus AOS is pretty dry or the charge pipe has become dry?

The longevity of doing this to a stock turbo would be my concern.

Yes, I am aware.

A Sub out RCA could have added more value to this system. Bavsound offers it with their amps. Edit: Could this maybe have it here

Yes the idea is to flow with the oem styling. I trust the shop as they specialize in fabrication.

Based off the sub requirements they may not need to protrude towards the trunk area but will need to increase the height. I requested to do a ported rear firing enclosure vs the up ward enclosure most have done.

I dropped my car off at the shop yesterday to start my audio build utilizing aftermarket equipment and removing the oem enclosure and building a new one. I'm thinking starting a separate thread and document the progress.

It could very well be x3 if the first 6 channels have a 2ohm load rating.

I never asked what the rms with a 2ohm load for the first 6 channels would be but ch6 and ch7 can be run at 2 ohm at 280 rms. So at minimum this is a 1660w rms amp. Very powerful.

Maybe lets see: Ch2 Front L Tweeter 175w (100w rms @4 ohms) Ch3 Front L 4" Woofer 175w (100w rms @4 ohms) Ch4 Front R Tweeter 175w (100w rms @4 ohms) Ch5 Front R 4" Woofer 175w (100w rms @4 ohms) Ch8 Rear Left component 175w (100w rms @4 ohms) Ch9 Rear Right component 175w (100w rms @4 ohms)...