Search results

Brah, don't tell me that. Is that the next batch?

I fixed my oil consumption issue with some Motul 300v 5w30.

Like I stated before, myself and others use the tags to easily differentiate between the mechanical differences. It's just easier when working on the platform. Saying "A90 6-port" and "A90 2-port" works just as well I guess, but I'm too lazy for that. It's cool that people take pride in their...

I'm still going to use A90 for 2020 2 ports and A91 for 2021+ 6 port engines. As I posted before: It's easier to defer to A90 for the 2 port cars and A91 for the 6 port cars. Most shops that work on these platforms do that. For me, "A91 Edition" and "A91 CF Edition" are the actual names of...

I think BC Forged is sitting around 4 to 6 weeks. LD97 is at 6 to 9 weeks. I had correspondence with them recently. Others are sitting around 4 to 6 months.

I'll take a video of how to do it this weekend. Below is what I posted in the Wheel thread on what I did for fitment. I'll get camber and front height this weekend. RSR Best I Active Coilvers Rear springs are sitting on an a pair of Allstar Performance 1" Perch Spacer Rear adjuster has about...

Let me know how that Install goes. I don't know if I'm going to do it or leave it up to people who actually know what they're doing to do it.

There is nothing official out now. Only thing out in the wild is a picture of what looks to be a GR Supra interior with a manual transmission. No word on if it's for the B48, B58, or both. IF there is a GRMN version of the car... I hope you have deep pockets. Because it definitely won't be...

Done with fitment on this car: Final Specs Suspension RSR Best I Active Coilvers Rear springs are sitting on an a pair of Allstar Performance 1" Perch Spacers. We were maxing out the threading just to keep the wheels from tucking, so this was the fix. I left just enough gap to where my...

Reposting from the other thread: I lowered the rear of the car last night. I had a mechanic in the area explain to me how to use a come-along and some ratchet straps on the control arms to relieve the tension on the springs. All you do is: remove the lower mounting bolt of your shocks. wrap...

I lowered the rear of the car last night. I had a mechanic in the area explain to me how to use a come-along and some ratchet straps on the control arms to relieve the tension on the springs. All you do is: remove the lower mounting bolt of your shocks. wrap your ratchet straps at the end of...

Once I made peace with kissing my warranty goodbye, modifying my car became significantly more enjoyable.

Washed my car today and I figured my car's engine bay would be covered in water because of the new hood... but it was pretty dry. I'm super confused. Doesn't look like there's anywhere for the water to runoff. Well I'm good with that. :)

Full Race and Archer Fabrications/Harrison Performance have 6 port kits releasing early next year if you want to go the top mount route. I would recommend against using a piggy back with these options. ?

I have Aerocatches as well. I was going to install them after I gave the paint some time to cure. So far I haven't had any issues around 80. I wouldn't want to go too much faster than that without the catches installed.

Same thing happened with me. I used the liquid stuff as instructed and it created a mess. Luckily I had some thread sealing tape laying around.

The wing was modified.

Scheduled paint correction, ppf, and ceramic coating. This is for a lifetime coating and full front and lower side panels and skirts. Didn't realize how expensive PPF was going to be?. I also added new pictures to the first post showing the current updates.

Wiped it down. On the way to the detail shop for a quote, I decided to pull over and take a few shots to show off Auto Arts' work on the body. It's a little dirty, but the supra will get freshened up in a few weeks.

I wouldn't trust myself with a manual while trying to hit the torque numbers I'm aiming to achieve. I am looking forward to the GR Corolla with a manual.