Search results

Have to replace the whole hose. I got my local toyota dealer to order one in and install it for me. I ordered an extra one too because I know Im gonna break it when I go to install my chargepipe

Haha, I just broke the clip that connects hose to the turbo inlet, I've let the hose just sit into the hole and having gravity purely hold it in and so far after driving for a few weeks the hose hasn't came undone. Already ordered a new one, gonna be a pain to replace that shit : (

Yup same , installing my dinan turbo inlet …. So if I leave the hose unplugged everything will be ok?

Got it on ! Thanks for the clarifications guys ??

Is this loose enough ?? I have everything top downpipe still attached am I good to just disconnect the bottom with the top all buttoned up still?

I actually sprayed some wd40 in that hole and stuck a flathead in that hole and snapped the tip when trying to pry it open….. Maybe just need to keep on doing it more and more with more flatheads?

Yeah I figured, I had everything off , the turbo v band, the two nuts for the downpipe bracket, the clamp bolt and the nut that holds up the exhaust, it just wouldn't slip out of the damn exhaust even with a rubber mallet banging on it and half a bottle of wd40 :(. I guess I'll try again today...

So just kick the shut out of the silver thing?

Ok thanks guys. I was just confused because when I loosened the nut for the clamp it didn’t even “stretch out” like it was loosening, just stayed in one place because I’m the videos they loosen the clamp, i see it start to expand out like it’s loosening and they move the clamp freely. So all I...

So I decided to install my catless downpipe today, got everything off smoothly except the clamp the connects the bottom of the downpipe to the exhaust. I was working on it forever and it would not come loose no matter what and wouldn’t free itself, then I realize it looks like someone welded the...

Just make sure you dont lose the rivet pins like me when taking off the lid..... Lost like 2 of them by dropping them in the bay lol. A good tip to remove then is just wear some thin winter gloves so u dont poke your hand and just use ur index finger and push up from the bottom of the pin. The...

Yeah, i was expecting a bigger difference since Im basically opening up the whole intake. The only real difference in sound was the BOV/Flutter is a bit louder in the cabin with the lid off, but the intake suction noise with the lid on/off was basically the same. Still deciding if I want to put...

I have, I just installed mine yesterday. Currently is -5 to -10 Celsius where I live so I don't notice a big difference with the lid on/off. With the lid off its actually not that much louder, I would say maybe an extra 5-10% louder? But you lose the look for the carbon lid but also you have a...

Hey guys, I went to my local Toyota dealer today to check if any recalls were done and I found out one was done which was “Vacuum Pump ECU reprogramming” , This was done 07/07/2022. My ECU manufacturer date is Feb 2020 which was before the hard locks. However since they did an ECU reprogramming...

I usually fill up either shell 93 or chevron 94, whichever is ore convient or better priced during the time. I’ve heard chevron in the west is pretty good, all my Vancouver car guys run chevron 94

So if I'm pumping 94 from chevron and I flash the stage 2 multimap and set it on the 93 oct map through my wheel, and lets say I go on a road trip and theres only 91 available, can I switch the map back to a 91 map on the wheel, or I should only be running the multistage maps if I'm running...

Thanks for the added information. Lets say I flash the multimap stage 2 setup. I see on vidoes that the multimap packages only have regular gas maps like ACN91, 91, 93 etc, is there a way to get say on a multimap package to go from 91, 93, e30 etc? Or would I have to pay for a custom thing

Okok thanks again everyone! Looks like I have a decent understanding on everything, greatly appreciate everyone help!

Ahh I see, so its just switching between octanes on a certain "stage" then? Not switching between stages

So any compound that is a "light to medium" works?? Also phew, I thought it was like a pressure spot on the screen. I created a whole thread freaking out about it :/