Search results

Yeah that looks exactly like what I was struggling with. Honestly, I would replace everything while you're in there. Strut, knuckle, all the control arms if you can. It'll be pricy but at least you'll eliminate all your problems all at once

I no longer have a Supra, but disconnecting everything connected to the knuckle is pretty simple. And then removing the wheel bearing? (Not sure what it’s called) is easy but you will absolutely need an impact gun. It really does sound like u have a similar issue. Also I didn’t end up getting...

Yes but the front of the car, I lifted on low profile jacks.

If you're asking if you can jack it up from the sides, that jack should be fine. From the front, at stock ride height it might be okay. I'm lowered on HKS HAS and I have to lift the front from the sides, put the car on low profile ramps, and then jack up the front...

Could be the front ride height sensor

Did they give you a print out of the alignment data? I struggled with alignment issues especially the steering wheel being crooked. I was assured it was put to "Corvette spec" whatever that means and that the alignment was spot on (it wasn't). But usually, they give you a sheet with all the...

Do you know if the same guarantee is transferrable to second hand owners?

Oh I got this. https://www.amazon.com/dp/B08M6GHM93?ref=ppx_yo2ov_dt_b_fed_asin_title It was extremely easy to use, just pop it in and twist

For those that may encounter the same issue, It was the knuckle 100% I took the old knuckle off and I couldn't see a thing whatsoever as to why my wheel ended up looking like that. There was no damage at all to the knuckle so something must have been barely bent as it was unnoticeable. I...

I’ll take them

Oh I was going to ask you. Thank you so much for this! Seriously read my mind

Thank you so much, it really makes this look doable haha

So if you just remove the hub bolts, the wheel hub just falls out? Also, do you know the torque specs of everything attached? Thank you so much for these pictures, they help so much!

So then I looked at a picture of the knuckle and it looks like the wheel hub? idk whatever mates the wheel to the rotor (sorry I don't know all the correct terminology for everything) but is there anything that I have to pop out using some sort of hydraulic press or anything?

How to replace it and how to take off certain parts off of it. I just don't know, if I were to attempt it, how to disassemble it and reassemble it with the proper torque specs

Yeah I'm trying to do this myself if possible but I was just wondering if anyone else has had a similar issue. Also kinda wondering if anyone can find a video of disassembling the suspension for a Supra... I have had 0 luck.. It's all coil overs and such which helped me with the strut/spring...

Hello, my first real post on this forum. I was lucky enough to buy a used Supra a couple months ago and put Burger Tuning spacers on it 13mm/15mm front/rear. Upon installation, I noticed that the front left wheel looks more cambered in compared to the front right wheel. I took it to a shop who...

Hi, what company are the rear spats from?

Thank you! Looking forward to putting them on!

Still have?