ArmenLS1
Well-Known Member
- Thread starter
- #1
Public service request issued, lol
Just asking some of the Supra/bmw gurus here to view these logs and see if they notice anything different. I'm coming from a world of different parameters. Your input will let me know if there's anything out of the ordinary as I get more comfortable with zee German. Ja?
The logs are all done on Stage 2 MultiMap 93 octane, filled with 94 Octane Canadian gas, contains up to E10. Logged in Sport mode, T/C & VSC fully off. I apologize that certain channels may be logged in metric, i.e. boost, afr. I reset those figures in the logger for next time.
Specifically looking to see if ignition advance is ok, is it on the low side? Is power delivery there as far as torque requests? And certain occasions of throttle closure in upper rpm band on 1 or 2 of the logs?
3rd and 4th Gear Pull:
https://datazap.me/u/armen/log-1695384072?log=0&data=
4th Gear Pull:
https://datazap.me/u/armen/log-1695384108?log=0&data=
3rd Gear Pull:
https://datazap.me/u/armen/log-1695384174?log=0&data=
Another 4th Gear Pull:
https://datazap.me/u/armen/log-1695384463?log=0&data=
If BM3 logger view is preferred I can link that.
EDIT: I had the RAM torque at clutch channels set to lbs-ft, for some reason on the logs show up as nm but the values are too low to be true nm's.
Thank you!
Just asking some of the Supra/bmw gurus here to view these logs and see if they notice anything different. I'm coming from a world of different parameters. Your input will let me know if there's anything out of the ordinary as I get more comfortable with zee German. Ja?
The logs are all done on Stage 2 MultiMap 93 octane, filled with 94 Octane Canadian gas, contains up to E10. Logged in Sport mode, T/C & VSC fully off. I apologize that certain channels may be logged in metric, i.e. boost, afr. I reset those figures in the logger for next time.
Specifically looking to see if ignition advance is ok, is it on the low side? Is power delivery there as far as torque requests? And certain occasions of throttle closure in upper rpm band on 1 or 2 of the logs?
3rd and 4th Gear Pull:
https://datazap.me/u/armen/log-1695384072?log=0&data=
4th Gear Pull:
https://datazap.me/u/armen/log-1695384108?log=0&data=
3rd Gear Pull:
https://datazap.me/u/armen/log-1695384174?log=0&data=
Another 4th Gear Pull:
https://datazap.me/u/armen/log-1695384463?log=0&data=
If BM3 logger view is preferred I can link that.
EDIT: I had the RAM torque at clutch channels set to lbs-ft, for some reason on the logs show up as nm but the values are too low to be true nm's.
Thank you!
Sponsored
Last edited: