What did you do to your Supra today?

[J’s Mk5]

I repainted my entire garage, and all that did was make it clear the garage floor looks terrible—-so NOW I have to epoxy the floor so it looks good w the Mk5 in there!

 

[puzzled]

AMS in gloss cf but wrapped it gloss black to match the base and left the “fin” exposed carbon fiber

Looks good. I did the same except mine is the dry carbon version. I only use the driver side on my Supra.

 

[GarGaMeL05]

AMS in gloss cf but wrapped it gloss black to match the base and left the “fin” exposed carbon fiber

NIce. Where can I buy the fins? Does it really help with the wind noise issues? Thanks

 

[Tsar]

NIce. Where can I buy the fins? Does it really help with the wind noise issues? Thanks

You can’t just get the “fin” part. You have to buy the whole part. You can get it from ams or IND. It does get rid of the wind noise completely.

 

[kona61]

NIce. Where can I buy the fins? Does it really help with the wind noise issues? Thanks

You can’t just get the “fin” part. You have to buy the whole part. You can get it from ams or IND. It does get rid of the wind noise completely.

You can buy 5$ door deflectors that provide the same effect, albeit slightly less pretty. They are made by hypersonic, two have writing on them, two do not. You just cut them to fit and paste them on. They work up to about 80 mph.

 

[Batman]

You can buy 5$ door deflectors that provide the same effect, albeit slightly less pretty. They are made by hypersonic, two have writing on them, two do not. You just cut them to fit and paste them on. They work up to about 80 mph.

Is there a 3d print file out there for one?

 

[kona61]

Is there a 3d print file out there for one?

Not that I know of. I figure you can’t get cheaper than $5.

 

[GarGaMeL05]

You can buy 5$ door deflectors that provide the same effect, albeit slightly less pretty. They are made by hypersonic, two have writing on them, two do not. You just cut them to fit and paste them on. They work up to about 80 mph.

Got a link? Thx

 

[kona61]

Got a link? Thx

Sorry, it’s an unimaginable $9 now...

 

[GarGaMeL05]

Sorry, it’s an unimaginable $9 now...

Thanks

 

[puzzled]

I got the GoJacks (6313) with the storage rack over the weekend and tried it on my various cars. It works well on my cars except the rear of the Supra. The Supra is 3-5mm too low on the inside wheel well and the GoJack's caster mounting bolt/nut would not clear the air deflector under the car. So close..

Anyway, decided to keep the set since I can use them on my other cars, and ordered 2 more of the 'slick' version 4520 for the Supra's rears. 4520's work on Lamborghini's so should work on the Supra.

The reason why I did not go with the 4520's from the start is because they are wider than the 6313 (compatible up to 13" width tires where as the 4520's support 20" width tires) and worried it would not fit between the garage wall and tire of the cars I park along the walls when I want to go lift them.

6313 requires about 28" clearance between the wall and tires.. one could still fit the GoJack at like 26" clearance from the wall if they rotate the GoJack while inserting it under the tire.. but that can get a little tricky.

My Supra is parked in the center spot of the garage, so no issue with clearance.

 

[puzzled]

Tower bars today.. I need to paint the bolts black.

 

[kurumi]

Tower bars today.. I need to paint the bolts black.

Just get all titanium bolts for the engine bay. Then you won't have to paint your bolts.

 

[iND-Distribution]

AMS in gloss cf but wrapped it gloss black to match the base and left the “fin” exposed carbon fiber

Nice job! Love the look.

NIce. Where can I buy the fins? Does it really help with the wind noise issues? Thanks

They work like a charm; here's a link to our product thread:
https://www.supramkv.com/threads/ind-ams-performance-a90-supra-anti-wind-buffeting-kit.5390/

 

[GarGaMeL05]

Tower bars today.. I need to paint the bolts black.

Thats a nice brace. Got a link? Thx