I'm not sure if for ta Mac compatible the software. I use an old windows PC.
You can increase the gain overall as the output from the head unit seems very low to me. And then you can also increase gain on each individual output. It's very easy to use.
That's great news. With my system due to the small 4inch speakers in door I had to tune in some midbass from the subwoofer. Using the DSP. I found that increasing the Freq range that the subwoofer plays at but reducing the amount of amplification at the higher frequency by 6db so it blends in...
That is fantastic craftsmanship and an excellent range of speakers. Is the lower OEM section also part of the enclosure? or only the new section?
Is there a picture from the behind the seats to get a perspective. Have you heard it yet?
I thought they would run into this issue, as I did. I did however manage to remove it completely and it gave me loads more room. I found it difficult to work on the part behind the seats with the different angles. I was hoping they would go to the effort of removing it, so I could get some...
That will be interesting look forward to the result. They need to be careful with height towards the seats as the top of the seat may hit the box. Make sure it doesn't encroach further than the aluminium bar. Or make it an angle. If that makes sense.
Yes, please I would like to see how they rebuild the subwoofer area. I struggled to keep the structure light and not take up much more space than the original. Its harder than it looks especially behind the seats where there are all sorts of angles as it slopes towards the trunk.
I did not...
I have been running the most25 preamplifier now for more than a couple of months and not a single glitch. it integrates perfectly with the Supra's warning tones phone I drive etc.
Mobridge is an Australian business. I purchased the first unit and the firmware wasnt right. I had a thumping...
this is positive news. I agree that idrive controller is a better control. Are they going to do a video? I would like to know where the unit is installed.
I can confirm the BMW Audison K4E's fit perfectly like OEM in the doors and the tweeters click in place of the JBL's like OEM too. The crossover sits perfectly behind the door panels. They sounds very clear. Tweeters are set to -3db
So here is my system spec so far.
Currently running a...
Yes there are screws behind the carbon piece. I would suggest wrapping the gear lever in Tape or plastic film as it can get scratched when the carbon trip is pulled up.
Also note that there are 2-3 connectors that need to be unplugged so when you lift the carbon piece just gently unplug the...
I hope the ones I ordered are correct??
The pictures that I took shows the two holes line up perfectly but the top hole is off. The picture was with the OEM door speakers. I have not at this stage bothered with the rears. Rears are just for fill. You could get away with keeping them stock...
Here is a picture I took of my fronts OEM compared to the "M's"
The holes don't line up
The rears I am certain are the same but I am not sure
I have ordered the "E's" not sure when they will get to me.