Search results

Yes..same here the steering wheel is perfect but I don't think it can ever be removed without using some sort of vice or puller.....I guess when does anyone ever remove a steering wheel? I had some iron filings after tightening. The OEM did not have a tight fit at all. Anyway who's going back...

Felt worked on the drivers side but for some reason despite numerous attempts the left side continued to creak. Its a trial and error thing. Its tempting to remove the aluminium bar out for good. the seats and recline more as it does nothing to stiffen the chassis

I had the same issues. Terrible design. I pulled all the panels off tried tessa tape and all sorts of things I ended up using a dremel and grinded away some of the the plastic tabs in areas I lined the rear of each panel with a thin butyl/foam sound deadening material. I took the aluminium...

Great news!!

any news or updates?

Sorry I have not moved forward yet with this

Ok, my Alliexpress steering wheel arrived. Quality is perfect. I did the install and had some difficulty. Just thought I will report the issues I found so others can learn and decide which path to to take. Airbag was a breeze to remove. I tried a short wrench on the bolt and could not break...

I'm not sure what it looks like but if you lift the wireless charging Pad there is Purple antenna connector wire not sure where the wire runs to.

Hi Jason, I watched your build on your youtube. I am amazed cant wait to see the project unfold. Please can you advice the Audison Bit DMI does the connector from the OEM premium amplifier just plug directly into the Audison DMI unit? So I can simply remove this amp and place a Audison DMI...

That's exciting news! Please keep us updated

The following wiring loom carries all the speaker wires. (See area marked with red circle) I have to test the polarity of each to identify which colors are positive & Neg. Cut the entire Loom in that spot and connect in the DSP. The DSP will only receive the front and rear (Sub) signals for...

I subscribed to your channel, so I have been following your build. There are very few Supra's on internet having a proper sound system done. 6.5 inchs in the doors would be so good. Love to see how yours goes.. I am going to have to take the doors off and trace both the wiring color coding...

Anyone have more a more detailed diagram yet? pinouts? wiring colour coding and polarity? I would like to do a full rebuild. I am not happy with the sound. Thinking of the following: DSP to fix the signal - connect high level front and rear output from exiting amplifier Summed and retuned...

I just installed the Blitz front tower brace - easy install and the front end feels tighter, tougher and better over uneven surfaces and corners. I think it looks good too. Now I am interested in the following rear brace...

Anyone following bimmertech's BMW headunit replacement and android auto/carplay mods? I sent them an email a few months back and got told that 4months they will have a Wireless Android auto module. I was pleased to hear back and get a positive response. Wondering if anyone's heard anything? or...

Link https://www.aliexpress.com/item/1005001869126075.html?spm=a2g0o.productlist.0.0.4c961e027XEqhA&algo_pvid=c670e548-e49e-4680-8005-81758403838f&algo_expid=c670e548-e49e-4680-8005-81758403838f-7&btsid=0bb0620316085900783823135eeb53&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

I just ordered it. What the hell. Its so much cheaper than anything out there. It arrives on 16 January should take me a week to have it on. I will send photos and report back

Leather/rubber side panel pulls off there are 10 or so torx screws the whole plastic panel pulls off There are two Torx screws under the rubber cub holder liner and the whole head rest pulls up easily. When thats off you can pull up on the carbon fibre piece unlplug the connectors (about...

I checked it out - its very similar to the one I've seen on ebay which is significantly more. It would not be my first choice (stitching color and perforated leather) but the price is really hard to pass it up. Would nice if someone who's bought one can chime in. Quality is always a concern...

I'll check that out. IN the meantime let me know how it goes. Quality etc and please send me photos.