Search results

Good condition, but didnt like the fitment which is why I'm selling for cheap. Includes pair of trimmed fender liners. Asking 300 picked up, Chicago area Fitment pictures, you can see the gap.

No road scrapes but some marks from rubbing on the heatshield and crossbrace. Includes OEM valve motor, and I can throw in a set of new replacement midpipes if you are interested. Don't have a box big enough to ship so you will need to come to me. Located in 60491. Asking 1200 picked up. Edit...

These gloves are have 3.3/5 SFI fire rating, which does not expire as long as the gloves are in good condition. These gloves have outside stitching, for better comfort and feel when you wear them. Used for 1 season, purchased in the fall of 2024. Asking 50 plus actual shipping Edit 35 plus...

Unlike other tow hooks or tow straps, this is a single piece design. There is no joining bolt or pin to break. The threaded STEEL shaft is permanently sewn into place. These are not mere show pieces, they are intended to recover your car out of the sand trap. I Paid 270 for the pair. You...

Pair (two) seat belt extender, regular 7 inch black. Useful if you switch to a bucket seat and are retaining your oem seat belt for street driving. I paid 40 bucks for the pair. You pay 25 bucks shipped (within the US).

No tears in the fabric but does have scratches on the back (some, pictured) and bottom (lots, not pictured). FIA rating valid until 2028 - still has two more years of eligibility for racing, or can be used for HPDE indefinitely. Seat bottom cushion and leg pads have been changed out to "Confor"...

Nothing wrong with them, still in the original shrink wrap packaging. 250 shipped to CONUS Price drop 200

Great condition, pulled from a 2023 Supra with 15k miles. No rips or tears in the leather, all mechanicals work. You will need to transfer your own seat belt Buckles, since i moved them to my new seats. You can also buy a used set, they are the same across all BMWs, part number 7313299. $1000...

These instructions correspond to those of you installing the DivineDrive intake duct, or anyone else that is annoyed by the active cruise being overly cautious, even at its minimum setting. Note that ACC can be disabled by holding the "closer" button the steering wheel, but will re-enable...

New in packaging. 15 plus actual shipping.

Used for about 15k miles, includes dinan carbon inlet elbow that is usually sold separately. Heat shield has some scuffing on the edge where it rubbed against my Turbo heat shield, damage is just cosmetic (see picture). No cracks on the carbon fiber. 475 USD Buyer pays actual shipping...

Got annoyed with trying to compare dimensions across different websites, so I dumped all the info into one spreadsheet. Screenshots are pasted in case you want to check other internal/external dimensions. Shoulder external width limit for the car is about ~625 mm. Haven't been able to find...

Looking to buy the style shown in this amazon listing, with the clear top and silicone elbow. Have a dinan intake with carbon inlet elbow if you want to do a straight trade. Located in Chicago but can do a cross-ship.

keywords: camber toe front rear total in out negative positive bumpsteer stable unstable crash

Buy the lower Fender vent here: https://www.circuitworx.com.au/products/toyota-86-brz-guard-vent-lower-behind-tyre Tools needed: Tape measure Sharpie marker Cutting tools (i used 4.5 inch angle grinder w/ cutoff wheel, and oscillating multi-tool with half-moon blade) Pop rivet install tool...

Hood vent has some touch up paint around the rivet holes, and two of the holes on the top are slightly oval'ed out from when I drilled out the rivets. Should produce roughly ~63 lbs of downforce and ~+11.2% pressure across the cooling stack at 120mph. Assuming extrapolating the data for the...

Used for about 18 months. Comes with the armaspeed screws and spacers for rear, generic pushpins for front Note that the bmw-style replacement front rivets I got kind of suck, they will work but you need to be really precise with your hammering. I recommend getting bmw-style ones from Toyota...

3d printed battery tray trunk bins, same as these ones from Etsy. I bought these thinking I'd use them for like oil and brake fluid and stuff, but I just end up throwing everything into my roadcourse bin because I'm lazy...

problem statement: high downforce wings (AJH, V1X) generate enough downforce to compress the adjustable support pads for the trunk. this causes the trunk to press into, and shatter, the tail lights from the top. if there is paint wearing away along the edge, it's making contact. Brian on the...

As title states, hopefully someone has a set laying around they're not using. Suspension Strut Bumper (Front) Part Number: 48331WAA03 Supersession(s): 48331-WAA03 located in Chicago area for shipping purposes, 60491