Sponsored

Search results

  1. Bad smell under the hood when CTEK connected

    No aux battery in the front for my car, I've been in that windshield wiper/battery terminal area multiple times. From the AI response you pasted , it only shows up in the z4 30i. The other link it provided was a total hallucination from a Dodge Ram cargo van Facebook page. Come on, are we not...
  2. Vader Solutions LPFP install

    Oh, yeah if it's the aftermarket electrical that is leaking - that has plagued pump vendors for decades. For years we struggled with fuel wicking along the wire sheath, even with cable gland fittings. They make liquid tight bulkhead studs, which look like what you have there.
  3. Vader Solutions LPFP install

    Split o-ring gasket is not unheard of, jackie ran into issues with that. He noticed the fresh o-ring was quite a bit smaller so it fit much more snugly.
  4. New MST V3 Leaking Air like Crazy

    No, the charge pipe and manifold sensors would give correct pressure readings regardless of a pre-turbo leak. Additionally, the preturbo temperature sensor (its not a MAF sensor on b58tu engines) gives the same reading whether it sees 100% or 10% of the incoming air.
  5. Max power with 92 octane pump gas, no E-blends

    As great as the BMW valvetronic system is, the aftermarket companies still haven't caught up. That's why aftermarket cams on this engine typically only get you a half mm more Maxlift. The intermediate lever is the limiting factor, and as far as I know, nobody makes a replacement. If you stick...
  6. Max power with 92 octane pump gas, no E-blends

    A 900-hp rated turbo will get you to 600whp on pump gas, but there are some caveats. Ideally, you'd want to pick the compressor wheel thats at peak efficiency very near redline. The omega 65 fits the bill on the compressor side, but the "hybrid-like" design (big compressor, small turbine) is...
  7. EVAP Canister Delete cause fuel starve?

    That thing you circled is not the charcoal canister. Its a diaphragm that smooths out the flow of fuel vapors. Here is a diagram of the charcoal canister connections
  8. Sold: FS: seat belt extender pros (regular 7 inch black

    Pair (two) seat belt extender, regular 7 inch black. Useful if you switch to a bucket seat and are retaining your oem seat belt for street driving. I paid 40 bucks for the pair. You pay 25 bucks shipped (within the US).
  9. Kenji “Race” down-pipe

    Oh you weren't here for the drama. A90 shop and armytrix had a falling out and so a90shop started making shit up about armytrix dp's not working. I'm personally at 23k miles with a mixture of locked DME and MHD tune (witb cat monitoring ON) with no CEL...
  10. Kenji “Race” down-pipe

    Could you please link to where you saw this, so that we can shut it down from the source? So that idiot doesn't keep spreading misinformation.
  11. Designing FT-1 inspired wing- Looking to see if there is demand as well as suggestions for improvement

    Unless the wing flies off, the force is never "lost". But yes, your intuition is right that wing setback affects the load distribution applied to each bolt.
  12. Battery issue

    Wild, i didnt know the alarm battery was built into the siren. I guess it makes sense, the regular battery is easily accessible for thieves to disconnect. The siren is in a pain in the ass location
  13. Designing FT-1 inspired wing- Looking to see if there is demand as well as suggestions for improvement

    Thats the tricky thing, can't do a stick-on angle aluminum gurney for a 3d wing. You need to either mold the gurney to the wing shape, or find something sufficiently flexible
  14. Designing FT-1 inspired wing- Looking to see if there is demand as well as suggestions for improvement

    I believe mario is trying to organize a group trip at the a2 tunnel in the near future as well, on the occams discord.





Top