Edit: added a dyno graph
Wanted to share for anyone who might be interested.
This is the P2uned Series 1 Turbo Kit with the EOS Intake Manifold and Port Injection. I’m running a Xona 9564s, with two turbosmart wastegates and a Tial Q50 blow off valve.
This setup on E85 makes between...
We suspect the new converter wasn’t pre-filled with fluid, and installed a new converter from Pure properly pre-filled.
That fixed the issue, just got my first passes yesterday starting to feel it out.
Replaced the APR radiator cover
Added a new AMS ECU cover, with a gloss coat
Cut the AMS engine cover to fit the new manifold
Replaced the turboguard with a KLM guard
I can take no credit for this.
Picked up the car today from Evolution of Speed, where @Jesse DaBears and Mike had put in a ton of work on the car over the last few weeks.
Together they installed a new EOS intake manifold, rebuilt the turbo kit completely, fixed some of my mistakes, installed a...
Update -- After talking with three highly respected tuners, all seem to believe it's an issue with the high stall converter.
I've reached out to Pure, to see if I can have it removed and sent back for inspection or replacement.
Vehicle: 2022 Supra ZF8 Automatic Transmission
Transmission Upgrade: Recently installed a built transmission with a high-stall torque converter.
Main Symptom:
When in gear, with the brake fully depressed and the throttle fully applied, the RPMs do not exceed ~1,000.
Tuner created launch...
Got a Pure Stage 1 installed and am working with Mikey on a new tune, here's the first pass without any changes.
This run was on street tires in 40 degree weather, maybe 70% throttle, otherwise the back end breaks out and wants to go sideways given the tire / weather combination.
Also...
Cloned ECU on ECUTek
XHP in stage 2
Automatic 2022
EOS Port Injection w. 1050cc injectors
Visconti fuel pump
Visconti E sensor
Motiv Reflex / harness
E85-E87 fuel
DSS axles
P2uned exhaust manifold and downpipe
AWE exhaust
Custom fabricated charge pipe
Tial 40mm wastegates(s)
Tial 50mm BOV
Xona...
1fastsupra.com does quite a bit for the community, including JB4 tuning which can be a reliable way to edge out an extra 80-100 crank horsepower without putting you in a dangerous position or voiding your warranty.
The owner is @Jesse DaBears
I happen to be looking to move into the next power level, and will be selling my newly rebuilt / never tracked 9564s... That was previously owned by @zrk -- if you're interested, I'm sure we could make a deal ?
The Xonas are great in my experience so far, and I'll be replacing mine with...
This is why replies to reviews on major platforms are limited to a single response.
*Shares negative experience*
--vendor posts 10 replies and calls it a misinformation thread
I have no intention of doing business with you, your reaction to a negative review is the equivalent of a child...
As the seller in question, your opinion is bias. This was my experience, and my review of that experience, as your customer.
I'm glad yours is running fine. I doubt we have the same build, so I don't quite get your point.
This may be okay for anything with stockish valve cover pressure...
For $110, they could include a $0.10 clamp, but it should not be necessary.
The point of the review is about the quality, and time. While your sarcasm and response provided approximately 0 value for the community.
This logic of needing to add your own touches to an aftermarket product, is...
Hey forum friends. Wanted to share my experience with a product here.
**Review of OEM+Plus Mods Valve Cover Breather for 2020+ Toyota Supra**
I recently purchased the OEM+Plus Mods Valve Cover Breather for my 2020+ Toyota Supra and had a disappointing experience. The product took three weeks...