Search results

Really. Big statement. Phil

To bring in a "grey import" you need a licence and do the conversion of seat belts headlights and other stuff. I worked with a guy that used to do it as a business on the side with his brother. Flew to the Japanese auctions every 2 or 3 months then shipped them home and converted them. They...

Nicely said and a torque number. When you've laid under enough cars pulling clutches and gearboxes without a lift you learn to look after them technique wise. A lot of people won't believe that technique is a massive part of clutch life though. Reminds me when I was much much younger and I was...

From what I've seen a good stock manual Supra will make about 390hp at the wheels so that's around 20% on 470hp. I wouldn't want to go too far down the precise numbers road though Dynos being what they are. A torque figure would be nice but I'm guessing comfortably under 500ft/lbs Phil

Really. It's just a general comment, not aimed at anyone in particular. Phil

Yes torque is the killer. I forgot the calculation reverses between small and larger output engines. Phil

Like those wheels Phil

Maybe but I've never seen a clutch with only 20% headroom over stock, even on a grocery getter. With that little margin there would be literally 75% of owners with slipping clutches on stock HP within a very short time. Phil

Here's a pretty typical "the clutch won't handle a modest increase in HP without slipping" scenario/story. The user has already glazed the clutch friction plate and flywheel face with poor clutch skills/operation. The first sign is clutch slipping under maximum torque application or a modest...

He's already replace the battery but it sure sounds like that:dunno: Phil

Just go and put 20 miles on it and a few starts and see what happens. Phil

If you mean an old style shifter gate like a Ferrari uses then I don't really think you can use one on the Supra because the shifter shaft dia is too large. You need a thin shaft diameter and a fairly wide side throw to use one I would have thought. On the std shaft you would end up with...

There's generally two reasons manufacturers specify one use only fasteners these days. One is the fastener is a TTY bolt and the other is the bolt requires a locking medium such as Loctite to be applied which the new OEM bolt will come with pre applied. Manufacturers don't trust dealer techs to...

Yea looks good. I assume the revisions will include closing the gap between the two pieces when fitted? Phil

Yea the original was too serious and political although I know where your politics is. Better keeping it to cars. Phil

Funnily enough I do love chocolate. Phil

New struts and both sides. Occams Razor would suggest no issues. Phil

Seems easy to me. Tell the dealer you will buy the car pending the removal of the wrap and the original paintwork is all good. Phil

I would not say that. It's not particularly hard but most cars you only need to open the hood to pour the oil in and you change the filter from below when you drop the oil. So pull the drain and while it's draining swap out the filter and then reinstall the drain plug. Slide out from under and...

You should be able to log this and find the reasoning with all the EFI work you've been doing surely? Or is it too random? From my understanding "rev hang" is a programmed emission reduction strategy but this sounds a bit different? No issues with this on my car for info. Phil