ARM 6" Catless Downpipe

[zadam10]

As we all know ARM sells catless downpipes for this car but they have jsut came out with a 6" catless downpipe which accutaly sounds a lot better then the regular 3.5" and made my flames bigger, prefromacne wise didnt notice a big difference but it gives the car a nice tone compared to 3.5 and makes bigger flames so i just wanted to give a shoutout to ARM Motorsport for sending this out and if you wnat to pruchase anything from ARM Motrorsport use code "ZADAM10" for a discount

Sponsored

 

[bushido]

@_Sp1ral0ut

 

[_Sp1ral0ut]

HOLY FUCK BIGGER FLAMES!!! Are they longer too or is it just the girth that's enlarged? Good to see the prefromacne wasn't effected. *phew. Did you have to change up the flame pill...I mean tune to make them bigger or did it happen naturally with the larger pipe?

This is great news. I am always after a badass flame tune!

 

[Rensuhlo]

Nobody cares about your bigger flames and lack of proper spellcheck.

Go away

 

[cbrummell]

is the 6 inch downpipe in the room?

that looks like a 3 inch DP with a mushroom tip

 

[RyanA90]

All the same chunk of metal unless they are true 3.5"+ exit... but congrats to you.

 

[_Sp1ral0ut]

is the 6 inch downpipe in the room?

that looks like a 3 inch DP with a mushroom tip

It's a 6in downpipe. It was just cold in the garage that day.

 

[cinosa]

That's not a 6" DP, for the record. A section of it might be 6" wide, but that doesn't make it a 6" DP when the rest of it snakes down to 3.5" / 3.15".

 

[_Sp1ral0ut]

Look he was told it's a nice big 6in downpipe. Using some sort of measuring device might tell a different tale, but for now, let him claim a 6in downpipe.

 

[cbrummell]

It's a 6in downpipe. It was just cold in the garage that day.

must've been in the pool earlier

 

[i3igpete]

That's not a 6" DP, for the record. A section of it might be 6" wide, but that doesn't make it a 6" DP when the rest of it snakes down to 3.5" / 3.15".

that's the worst part, the flex section is the same size as the exit, so you can't even chop off the tail section and adapt it to a 3.5" exhaust.

the huge diameter makes sense if you've got the honeycomb in there, since you need to compensate for the porosity not being 100%. it seems ARM didnt really think this one through

 

[_Sp1ral0ut]

must've been in the pool earlier

Fall weather, just got out the pool, it was cold in the garage, and he was nervous.

 

[Extreme Power House]

we dont offer catless but the transition from 3" to 6" is short of a pipe and does not add any noticeable benefit

Sponsored