Brembo Color Change (Seeking Shop)

[Excalibur]

I'm located in South Carolina.

Does anyone know of a reputable shop/company in the southeast near South Carolina preferably, that would offer a service to pull the F/R brakes and offer a powdercoating service to change the color and maintain factory Brembo look (labeling). I'm over the red. I'm willing to travel to neighboring states to get this performed.

Any help would be much appreciated.

Sponsored

 

[lucky phil]

Why not do it yourself with a pack spray can? The paint supply shop can mix any colour you like and 2 pack is at least as good as powder coat for callipers.
Phil

 

[Excalibur]

Why not do it yourself with a pack spray can? The paint supply shop can mix any colour you like and 2 pack is at least as good as powder coat for callipers.
Phil

In my experience, paint doesn't hold up as well as powdercoating for debris while driving, nor is it as heat resistant during any tracking.

 

[Timmy_Jones]

In my experience, paint doesn't hold up as well as powdercoating for debris while driving, nor is it as heat resistant during any tracking.

Oh well, I guess mine are bound to fail then? 2k and hardener in a rattle can. Cost me 70 bucks and a few hours of my time

 

[speedlimit]

In my experience, paint doesn't hold up as well as powdercoating for debris while driving, nor is it as heat resistant during any tracking.

Please correct me if I'm wrong but doesn't powder coating weaken calipers which is why it's preferred to just paint them? This could totally be an old wives tale.

 

[lucky phil]

In my experience, paint doesn't hold up as well as powdercoating for debris while driving, nor is it as heat resistant during any tracking.

Almost certainly because you haven't used 2K paint. It's a paint with a catalyst for hardening and is very heat resistant. Even stock Brembo callipers can eventually discolour the paint with consistent track day use.
Phil

 

[lucky phil]

Please correct me if I'm wrong but doesn't powder coating weaken calipers which is why it's preferred to just paint them? This could totally be an old wives tale.

Wives tail.
Phil

 

[speedlimit]

Good to know

 

[4seaer]

Sleek coating… prismatic powders Spanish gold matte clear full rebuild high temperature seals around 700 with shipping included

 

[4seaer]

Sleek coating… prismatic powders Spanish gold matte clear full rebuild high temperature seals around 700 with shipping included

They also do decals, I had my own

 

[rwense]

They also do decals, I had my own

High temp seals or boots? In my experience the high temp boots dont last but oem seals are fine. I swapped for high temp boots and after like 3 events they've blown out.

Sponsored