DIY guide for Reflector Insert Set

[BrettS]

As per the title, is there a guide on how to put these in, I assume looking at them they are pop out pop in type of thing but just wanted to make sure

Sponsored

 

[DarkZupra]

Front:
Rear:

Use a heat gun to peel them out, then make triple sure you get all the old sticky stuff out before you try to put the new ones in, or they wont sit right.

 

[Diablo]

Get a heat gun and beer. Lots of beer. Easiest to Jack the car up and remove the wheels

 

[BrettS]

Those are not what I’m talking about

 

[DarkZupra]

Then do you have a link to what you are talking about?

 

[BrettS]

 

[DarkZupra]

Those just pop out. A thin trim removal tool is all you need.

 

[BrettS]

Those just pop out. A thin trim removal tool is all you need.

Awesome thank you!

 

[BrettS]

Anyone know if you can get at the back clips without having to take off the rear diffuser/bumper?

 

[zrk]

Anyone know if you can get at the back clips without having to take off the rear diffuser/bumper?

Those just pop out. A thin trim removal tool is all you need.

 

[BrettS]

Those just pop out. A thin trim removal tool is all you need.

The clips on the back have to be compressed though?

 

[zrk]

The clips on the back have to be compressed though?

Fake news. They're standard automotive plastic clips. A trim toll under it, microfiber in between the trim tool and the paint, pop those motherfuckers right out.

 

[Jackyl tm]

The clips on the back have to be compressed though?

I jacked car up in Back and undid some of the hear shield bolts and compressed clips. Didn't try the tuck tool trick, may have been a lot easier.

 

[BrettS]

I jacked car up in Back and undid some of the hear shield bolts and compressed clips. Didn't try the tuck tool trick, may have been a lot easier.

Yup did the same, I tried just the pry tool at first but it sketched me out.

Sponsored