H&R springs + Yokohama Advan A052 R18

[aleks_lvr]

Hi everyone,

Need your advise on the Advan A052 tires. Car has stock struts with H&R springs and Verus camber plates + F 18x10 et25 / R 18x11 et40 wheels. Power is MHD stage 1 and will be mainly used for track days.

I'm trying to guess if 275/40/18 will fit on front without rubbing during cornering or should I stick to 265/40/18 instead?
Another question is should I use 295 or 275 width on the rear if I use 265 on the front wheels?

Appreciate for any advise.

Sponsored

 

[Subydude]

I run the 275/40/18 Yok on an 18x10.5 +35 wheel with a 10mm spacer that makes it effectively +25 and it's fine. I also have H&R springs, camber plates, and the same tune. I do have an Eibach front bar that might help keep the tire off some, but I never tracked it on the stock bar so I can't say.

You might occasionally have slight outside rubbing on the fender liner but on a 10" wheel I bet you won't.

I'd try the 275 square first and see how you feel. A 295 rear will fit and can be used with either a 265 or 275 front.