Rays 57CR TPMS

[TYMBOM]

Hello all. Question for all of you with aftermarket rims. The TPMS on the rears are not tight due to the curves of the rim. I can push lightly on the stem and air will come out. What did everyone do, or did people just leave it as is?

Sponsored

 

[a90jp]

How did this get solved ?

 

[gixxersixxerman]

Zero issues with my 57CRs and TPMS.

 

[30MilesOffshore]

I've had the 57Cr for 2 years without any issues. It sounds like an installation issue. The nut on the inside of the rim isn't secured properly, as experienced by air escaping when you push on it. Have the installer recheck it. You should be good. If not, then maybe you have the wrong TPMS.

 

[ArmenLS1]

Which TPMS should be used with the 57CR? Can the stock ones be put on?

 

[TYMBOM]

Which TPMS should be used with the 57CR? Can the stock ones be put on?

Not on mine. Snag some universal ones and program to 433Hz. Cheaper too.

 

[30MilesOffshore]

I'm running Huf Sensor for BMW Item # 36106877937 433MHz and haven't had any issues with it.

https://www.supramkv.com/threads/tpms-bmw-huf-sensor-36106877937-433mhz-works-fine.5132/post-235421

 

[NFamous60]

I used them valve stems supplied and left the tpms in my stocks. Guy at pep Boys was like constant burning out could have them loosen and fall out. Some crazy rant he was on. I think he just didn't want to do all the work but...

Sponsored