Welds and mickeys

[NFamous60]

Anyone running welds and mickeys on street? Stock turbo, I kno track it has benefits just wondering anyone who's went that route I'm trying to lower 60 to 130 rn. Next is 9.02 on Proxes R888s

Sponsored

 

[aksprite]

Anyone running welds and mickeys on street? Stock turbo, I kno track it has benefits just wondering anyone who's went that route I'm trying to lower 60 to 130 rn. Next is 9.02 on Proxes R888s

305/45/17 Nitto NT555r2 on some weld s77s. I chose the Nittos over Mickeys because I heard they were better in the wet. Been on my car for about 5 months and It’s been good, just make sure you get hubcentric rings so there’s no vibrations at high speed. As for grip, they’re perfect for my setup, mid 7 second 60-130 with no drama, even in 50 degree weather. The car will feel different with tires that wide but it’s honestly not bad for regular driving.

 

[NFamous60]

305/45/17 Nitto NT555r2 on some weld s77s. I chose the Nittos over Mickeys because I heard they were better in the wet. Been on my car for about 5 months and It’s been good, just make sure you get hubcentric rings so there’s no vibrations at high speed. As for grip, they’re perfect for my setup, mid 7 second 60-130 with no drama, even in 50 degree weather. The car will feel different with tires that wide but it’s honestly not bad for regular driving.

What mods are you running, I'm full bolt on with eblend on jb4. Mid 7s is dope

 

[gixxersixxerman]

My best is 8.35 with 5200da. Idk if I could dip into a 7 with good air but im sure very low 8. E50, basic bolt ons, running 305/35/19 Nitto NT05R’s. On a ”prepped” street got a 60ft of 1.66, 11.05@127 same day.

not bad for a “show car” as it was called.

 

[aksprite]

What mods are you running, I'm full bolt on with eblend on jb4. Mid 7s is dope

Jb4 e30 map 6 from Jesse, 4 inch catless downpipe, intake, and a very small amount of whipped cream thingy.

 

[NFamous60]

My best is 8.35 with 5200da. Idk if I could dip into a 7 with good air but im sure very low 8. E50, basic bolt ons, running 305/35/19 Nitto NT05R’s. On a ”prepped” street got a 60ft of 1.66, 11.05@127 same day.

not bad for a “show car” as it was called.

Got my babies on I see. 57crs are ? on the mkv

 

[Meraki Autoworks]

Yes have people running those, but just be careful driving those around on the streets. Cops and spinning out in the rain.

-Josh

 

[NFamous60]

Jb4 e30 map 6 from Jesse, 4 inch catless downpipe, intake, and a very small amount of whipped cream thingy.

Running same exact thing, catted Dp 4.5 from CTS, AMS Intake but I'm on R888s, haven't installed the meth yet. Using sport mode or manual? I just need more practice. More highway pulls then actually setting up

 

[NFamous60]

Yes have people running those, but just be careful driving those around on the streets. Cops and spinning out in the rain.

-Josh

Cops for the wheels???
Wasn't going to do much rain driving. Honestly aren't the process R888s better then the nitto 555s that's why I went with them.

 

[aksprite]

Running same exact thing, catted Dp 4.5 from CTS, AMS Intake but I'm on R888s, haven't installed the meth yet. Using sport mode or manual? I just need more practice. More highway pulls then actually setting up

Manual, lowest gear it could go into. I try shifting a little before 6k.

 

[NFamous60]

You starting at 55 or 50?

 

[aksprite]

You starting at 55 or 50?

Honestly I don't even know, I'm guessing I start around 50.

Sponsored