What did you do to your Supra today?

[Teleguy11]

It's not what I did to my Supra today, I would classify this as what I did for our Supra's today....
I recieved a survey from JD Power the other day wanting my opinion of my '21Supra. They actually sent me a dollar for my thoughts! The survey took about 30 mins to complete so I made a whole $2 an hour! ?

 

[Gabe]

Installed Sayber Design Fender Vents

Would you mind getting a picture with the hood up? What does it vent?

 

[Reda90]

Would you mind getting a picture with the hood up? What does it vent?

It vents the wheel well to relieve pressure and it seems to vent some amount of engine heat, but if you want engine cooling I would go for a dedicated hood vent setup.

Sorry if this video doesn’t answer your question I can grab a picture in the morning if you still want one

 

[alfi.mke]

Got some roller shots today! First time attempting this.

 

[Gabe]

It vents the wheel well to relieve pressure and it seems to vent some amount of engine heat, but if you want engine cooling I would go for a dedicated hood vent setup.

Sorry if this video doesn’t answer your question I can grab a picture in the morning if you still want one

thats perfect. Thanks.

 

[stormgreysupra]

Installed these new front bumper canards today

https://oemplusmods.com/products/front-bumper-canards-toyota-gr-supra-a90-91

 

[Eplejus]

Got my Blitz strut bar from RHDJapan. Installed it right away.

 

[Isaleus]

You are saving 0.0001 lbs ?

Post pics after install. I’m getting them eventually

Driver side done.
1. Takes longer then you think.
2. Getting door card back in is much harder then you think. Might have to reset some of the plastic push rivets by pushing the white part down
3. The drivers side window control is a latch that is a pain in the ass the get off. Have a friend hold the door while you get a pick tool to slightly push / raise the latch.
4. Quality and finish is between a 8.5-9/10. The 3D material stick out at the top and is not flush with the door. Looks like it was designed that way. Is also feel velvety which is nice.
5. Where you connect the door latch to the strap is also 3D printed. And is tight. Had to use pilers to force it in and back.
6. Makes the door harder to open but looks are pain.

Edit: 7: passanger side one of the door rivets broke when putting the card back in. Was at the bottom where there are the two ‘nuts’. So not a big deal.

The big point: Does it look cool and make me feel special? As special as the first day on the short bus. I love it.

 

[Scoopra]

New wheel feels much better than stock

 

[Diablo]

New wheel feels much better than stock

Looks great! Are you close to the Cincinnati area? We get together a few times a year to cruise into different Cars and Coffee events and talk crap.

 

[Scoopra]

Looks great! Are you close to the Cincinnati area? We get together a few times a year to cruise into different Cars and Coffee events and talk crap.

Kettering. I usually go to Dayton cars and coffee

 

[Gabe]

New wheel feels much better than stock

Looks great.
I’m debating whether to do this o go full crazy with a quick release one.

If I put buckets, I’d probably do the quick release

 

[stormgreysupra]

New rear diffuser fins! My favorite mod!

https://oemplusmods.com/products/rear-diffuser-fins-toyota-gr-supra-a90-91

 

[SupraDC]

OEM+Mods rear diffusers with red pinstripe installed.

Matte CF A-pillar covers installed, fingerprints not cleaned off....LOL.

My gloss delete is is getting closer and closer to completion.

 

[lucky phil]

OEM+Mods rear diffusers with red pinstripe installed.

Matte CF A-pillar covers installed, fingerprints not cleaned off....LOL.

My gloss delete is is getting closer and closer to completion.

I stayed at Arlington when I visited DC on holidays a few years ago. Enjoyable time.

Phil