Methanol without PI

[KAREEMMK5]

Question for the people running methanol.

Basically, I have two maps.
map 1 is without meth
map 2 is full power with methanol

My current setup is running 100% methanol through the charge pipe.

I have been reading about horror stories where in a setup like this cylinders 5-6 run lean and cause issues.

I spoke to my tuner who said I should be fine because methanol is tuned to be used at WOT only but PI would be more optimal.

What are your thoughts? Safe to run my setup or switch to PI?

Thanks.

Sponsored

 

[zrk]

I ran that setup for a long time. It was fine. I have PI now, because big turbo.

 

[KAREEMMK5]

I ran that setup for a long time. It was fine. I have PI now, because big turbo.

I am running a p800. I don't think that counts as a big turbo though..

 

[zrk]

I am running a p800. I don't think that counts as a big turbo though..

I was on a p800 on that setup.

 

[KAREEMMK5]

I was on a p800 on that setup.

Great. So I assume we are still safe.

 

[zrk]

Great. So I assume we are still safe.

Keep an eye on everything. But you should be ok. Using M1 or a blend?

 

[KAREEMMK5]

Keep an eye on everything. But you should be ok. Using M1 or a blend?

we dont have m1 here

using 100% renegade

https://www.akstuning.co.uk/shop/home/1277-renegade-pro-methanol-5-gallon-22-litres.html

 

[Jakester]

I am using M1on dual meth injection going into charge pipe. Everything looks good on logs and I haven't had any issues whatsoever. Been running it like that since January. That's all I got. Hope it helps.

Sponsored