Search results

toyota's decision kind of makes more sense now that you mentioned this ?

Thanks for the tip, I was able to find some Permatex plastic weld. Got it applied with a thin tip screwdriver, and then used an xacto knife to remove just enough material to get the connector to click in

I asked for the company's policy on all three titles. Salvage, rebuilt, and washed/clean. In Allstate's eyes, all three are the same. Once it's salvaged, It's salvage forever.

When I checked with my allstate agent before buying a salvage/rebuilt car, here's the direct quote: "Allstate will only insure a vehicle that has been salvaged (total loss) for liability coverage only. If you add a car that has been a total loss and is technically a salvaged vehicle, I can't...

any videos or testing on wheel hop reduction with the prototypes?

So to follow up on this, the downpipe had very little effect on top end VolEff, so the cylinder head or hotside appears to be the bottleneck there. However, the JB4 got quite confused on that first drive. Out of curiosity, I ran map 1 with default duty bias table, and still no go. The ECU was...

FENTON! JESUS CHRIST.

Interesting, has anyone tried it on here yet? I see a few bimmerpost threads, but they're all from 2017 or so (so the cars are probably ~2014 models). Did a bit of googling, looks like the old TokenSolutions PnP adapters no longer work on modern vehicles. It's a shame, I hate the idea of...

https://www.supramkv.com/threads/exhaust-flap-closes-jb4.6933/#post-205183 So when you go to "OEM mode" with both flashers, you need to shut down the engine for the settings to save properly. It's probably overkill, but I got out of the car and locked the door to ensure the setting would...

hi folks, I'm a big dummy and didn't fully unclip one of the connectors from the plastic wire harness cover while doing the downpipe. anyone know the part number? I tried to google the molded numbers but no luck so far. edit: i think this is the harness for that side? 82122WAA04...

Ah that's a shame, I used to alternate ATE gold/blue to ensure full flush without wasting too much. What do people do nowadays?

there are other benefits as well, I think someone may have oversimplified it (leading to some debate) but you do get a mild boosting effect when injection occurs fully after intake valve close.

the first introductory sentence of this guy's MIT PhD thesis: http://dspace.mit.edu/handle/1721.1/69496

oh my god I haven't thought about that in a long time

i think the issue is that there is a lack of information either way. until someone publishes a YouTube vlog of daily driving around town, there's no way to evaluate the drivability.

my brain always associates BMWs with tan seats so I actually would have preferred this, if I was building from scratch (minus the steering wheel)

... you had the opportunity to use 69 Ah and you didn't take it?

well i wish I knew this existed about a week ago... ?‍♂️

the IL emissions plot thickens. http://www.the370z.com/engine-drivetrain/74452-uprev-tuned-cant-pass-emissions.html#post2420139

Do you have a picture with the strap removed or the hole spacing? and what did you use to cut? i was thinking oscillating multi tool to get a clean line, but Im nervous about plunging it in too deep