Hi everyone im experiencing in those days the code mention in the threadās name, when i start the car fan is off, affer drive a bit and let her on idle with max A/C on the fan operate without problem, i stay to check that the fan was operating for more than 10 minutes and then turn off the car...
Hey guys, I have a 2024 6MT with a pure 900 currently making 734WHP/885nm with shaped torque curve to keep the rods happier.
Am i sending my block to an early grave by using RAL which from my understanding is essentially bypassing the shaped torque?
Example: 2nd Gear (6MT) with 50kmph roll @...
SOLVED: https://www.supramkv.com/threads/cel-just-wont-go-away-looking-for-advice-theories-help.32635/post-505039
Simply put, I am Femto unlocked with MHD running OTS Stage 2 and other than a pesky CEL, everything runs and feels great. Unfortunately, even after I have set MHD to ignore the...
I have a 2023 GR Supra and wanted to share my dyno results on pump 91. This is a conservative tune, and below is the full list of modifications currently done to the car:
MHD Tune
XHP Transmission Tune
VRSF Catless Down Pipe
FTP Charge Pipe
MST V2 Intake
Borla Exhaust
MHD Flex Fuel Kit
CSF...
Anyone had this error before?
Firmware versions: (1.30 vs 1.29)
Unlocker Connected (0/50 @ E4 65 B8 80 26 D8 )
DME is not ready, please wait ...
Connection errors have been detected
Please double-check both of the DME connectors
Once confirmed, power cycle the Unlocker by disconnecting and...
Hey everyone, curious with MHD+ integrating flexfuel now, is it specifically with their own flexfuel kit? For example if it is not solely for their brand would I be able to achieve flex tuning using MHD and a Visconti flexfuel kit?
Hi,
my supra (semi slicks, 275/35) has mhd stage 2 (102 Ron) and xHP stage 3 software on it, and my problem is, that my launch control is brutal ass, my car legit does a burnout till 3rd gear or it comes with a boost lag, where the boost randomly kicks in at 100kmh where i almost do a 360...
Location: Phoenix, Arizona
Vehicle: 2023 GR Supra 3.0
Title: Clean
Seller: Az Auto Hunters LLC / azautohunters.com
Price: $69,995
Miles: 4,080 actual miles
Sale type: Dealer consignment
A good friend/customer is having us sell his 2023 Supra for him. I'm officially selling the car under my...
F/S : Motiv Reflex+
Price: $600
Reason: Motiv's Reflex+ only works with BM3 or MHD.
For Ecutek, you need to buy Visconti's Reflex+ kit
Description: This is for the Reflex+ Box only. Long story short, I installed their kit only to find out that they do not have a patch to utilize that works...
so as of rn i have mhd stage 2 on my 2022 supra
but stage 2 on mhd for the supra is only off the downpipes
i have
catless dp, intake, turbo inlet pipe, charge pipe, full sp1-r exhaust, and will be getting all the cooling and intake manifold soon
(preparing for top mount turbo)
1.i was...
So I have another thread about running Sp1R exhaust and AA downpipes thereās some cool videos and pictures from other Supra owners if you want to go check that one out. But now we are talking about tunes. I am wanting to run bm3 stage 2 but donāt really know the reliability. I daily my car...
Hey guys, might be a noob question but couldnāt find much info online. Iām showing a 10D000 code (combustion engine: torque limitation active ). Tried researching some info on it and couldnāt find much. The car is on an e50 tune and shifts/drives great from what I can tell. Wanted to ask on here...
Hello there
i just checked my faultcodes via MHD today and got a Valvetronic error. I canāt find anything on the internet. The car is running pretty fine. Do I have to worry?
I've had a lot of amazing information from this forum, the Visconti team, and Justin @ Twisted Tuning.
With that said I'm a little big foggy on what I SHOULD be doing next to the car to achieve my goals.
Current Build:
Titan 4 inch catless DP
FTP charge pipe
Injen CAI
Visconti Flex Fuel Kit w/...
For those of us who retain factory emissions hardware and cat converters, increased emissions from a tune are negligible. But we'll have to comply to stay street legal.
BY CHRIS ROSALES UPDATED JUL 13, 2021 4:24 PM
Some folks on social media have started to post about a new California smog...
So today guys was a pretty sad day for me. Ive had my 21 3.0 supra since march 10th. Crazy enough it took me 2 months prior to even getting the car to nail down the exhaust. Because im the type that like loud an aggressive exhaust I decided to go with the Magnaflow Xmod. I mostly like this one...
Hello everyone!
A new Supra owner here, I decided to create a log for my car in case other people are interested in some of the parts I have installed/plan to install.
I signed up today because this forum have been really helpful for me, I had a lot of doubts and questions over some stuff and...