EU Spec downpipe ball flange to slip fit adapters - where to buy?

[w3stside]

Hey guys - EU spec 22' MT Supra owner, need advice on where i could source a ball-flange female to slip fit adapter to fit onto my EU OPF stock down pipe (9 797 593)

I have an AWE non-res exhaust currently installed on the car but I cannot use the AWE DP to MP adapter as it's a US slip fit adapter whereas my stock DP is the dumb EU one with the OPF/GPG cat shenanigans going on and it ends in a ball-flange.

Google hasn't really returned anything useful for me and before I outsource this to a machine shop I'm wondering if anyone here has run into this before.

My DP:

link to it in case: https://www.ebay.com/itm/326107564466

AWE dp to mp adapter slip-fit:

Any advice appreciated, cheers lads.

Sponsored

 

[Eplejus]

An exhaust shop should easily be able to fabricate an adapter with a ball flange that fits.
I think that would be the easiest solution, as I doubt there’s a pre made adapter available that would fit.

Most Supra owners here in Europe run exhaust systems like Akrapovic, Remus, Milltek, Garage Whifbitz etc, which come standard with a V-band flange for the DP-OPF connection.
So I’d say this isn’t really an issue that many people have encountered.

 

[w3stside]

Thanks mate. Was able to get in contact with a welder and he'll craft something up for me. Just out of curiousity which dp are you running?

 

[Eplejus]

Thanks mate. Was able to get in contact with a welder and he'll craft something up for me. Just out of curiousity which dp are you running?

I'm running a Wagner DP connected to a Milltek midpipe, in other words, both have a v-band ball flange.
Wagner DP is available with both slip-on and V-band.

 

[MK5_Ger]

Swap your downpipe to a M140i/M240i OPF/GPF one. These don't have the V Band and should fit without welding.
This will also allow you to swap back when you need it.

Sponsored