Oil catch can for Supra

[tedan628]

Hi guys,

i bought this oil catch can for our supra after one guy posted on facebook forum where he installed the oil catch can on the supra
https://burgertuning.com/products/b...h-can-for-b58-bmw?_pos=8&_sid=04f61903a&_ss=r

Can anyone show me how to connect the hoses to the crankhose port and intake line?

i did it on my subaru. I have not worked with inline 6 before. Can someone maybe guide me onthis?

thnaks

Sponsored

 

[Kiwi Greg]

Hi guys,

i bought this oil catch can for our supra after one guy posted on facebook forum where he installed the oil catch can on the supra
https://burgertuning.com/products/b...h-can-for-b58-bmw?_pos=8&_sid=04f61903a&_ss=r

Can anyone show me how to connect the hoses to the crank hose port and intake line?

i did it on my subaru. I have not worked with inline 6 before. Can someone maybe guide me on this?

thanks

BMS suggested this one for the Supra, the bracket may not be perfect though ?

https://burgertuning.com/products/b...4&_sid=f577b5d36&_ss=r&variant=31460724834419

I will get one when they are available

 

[tedan628]

this is the pict from the guy who originaly post this and inform me about it. and he gave me the link to the one i posted above.

 

[Kiwi Greg]

Nice, looks like it will work

 

[tedan628]

Nice, looks like it will work

yes i am asking him how was the install and where they go.. still waiting for his repsonse

 

[Extreme Power House]

Let us know how it goes

 

[tedan628]

i ll do a write up once i got it isntalled today.

 

[tedan628]

Hi guys,

So i installed the oil catch can. MY impression overall, very nice quality and easy to install.

Tips:
1. you need to remove the cusco engine cross bar if you have it on your car.
2. you will need a long screw to install the mounting bracket on the car. Please see screw pict reference.
3. You do not need to use the berger hose adaptor - i find it very hard to use the hose adaptor as it wont fit to the oem hose. I used the wider end of Berger hose to connect to OEM hose.
4. Adjust the oil catch can prior to tightening it.

 

[Kiwi Greg]

Hi guys,

So i installed the oil catch can. MY impression overall, very nice quality and easy to install.

Tips:
1. you need to remove the cusco engine cross bar if you have it on your car.
2. you will need a long screw to install the mounting bracket on the car. Please see screw pict reference.
3. You do not need to use the berger hose adaptor - i find it very hard to use the hose adaptor as it wont fit to the oem hose. I used the wider end of Berger hose to connect to OEM hose.
4. Adjust the oil catch can prior to tightening it.

Thanks for posting this up

Could you use the strut top bolt to mount it with that bracket ?

IIRC the other kit(when available) uses it

 

[tedan628]

Thanks for posting this up

Could you use the strut top bolt to mount it with that bracket ?

IIRC the other kit(when available) uses it

the cusco top bolt is too short to use on this. i would recommend you find an extra inch longer than the cusco bolt

 

[tedan628]

also drove the car for 5 miles (we have bad stormy weather here in NJ)..so far no CEL!.

 

[gdi2290]

this looks promising

 

[Kiwi Greg]

the cusco top bolt is too short to use on this. i would recommend you find an extra inch longer than the cusco bolt

I was meaning, could you use this bolt to mount the catch can bracket ?

 

[kurumi]

@tedan628 if you aren't planning on using that BMS adapter, I would buy it off from you. Otherwise, what a clean install it turned out to be.

 

[tedan628]

I was meaning, could you use this bolt to mount the catch can bracket ?

i didnt try it..i was thinking about that too but i wanted to make sure i can reach under wheel well to put the nut.thats why i decided to go on the cross member bar location. i am sure it can be done if you want too.

Sponsored