Yalemaier
Active Member
- Thread starter
- #1
Asking $3000, in Lebanon, PA, pick up preferred, but I have the original shipping boxes so if you need them shipped you must cover the cost.
Bolt Pattern: 5x112
Offset: +22 (Front) +35 (Rear)
Size: 19x9.5 (Front) 19x10.5 (Rear)
Original boxes & all documentation is included, plus Huf TPMS sensors installed ($150), custom 3D printed center caps ($180), and the necessary Muteki hub centric rings ($30).
NOTE: Inner part of inner barrel of front 2 wheels have a small strip of surface paint worn away. This was from a light rub from my SPL lower control arm bolts. It is purely cosmetic and has not affected the functionality of the wheels. It isn’t visible when the wheels are installed and could be repaired with touch up. Message me if you have any questions!
Bolt Pattern: 5x112
Offset: +22 (Front) +35 (Rear)
Size: 19x9.5 (Front) 19x10.5 (Rear)
Original boxes & all documentation is included, plus Huf TPMS sensors installed ($150), custom 3D printed center caps ($180), and the necessary Muteki hub centric rings ($30).
NOTE: Inner part of inner barrel of front 2 wheels have a small strip of surface paint worn away. This was from a light rub from my SPL lower control arm bolts. It is purely cosmetic and has not affected the functionality of the wheels. It isn’t visible when the wheels are installed and could be repaired with touch up. Message me if you have any questions!
Sponsored
Last edited: