Skebs
Member
- Thread starter
- #1
I feel like a dumb dumb lol. Recently replaced my steering wheel to a custom carbon fiber. The swap wasn't as bad as I thought and was able to transfer everything over from the OEM steering wheel, however the vibrating motor isn't functioning at all. All the controls on the steering wheel are working perfectly, except for the vibrating motor. Anyone run into this issue before? I have messed around with the vehicle settings and toggled between the settings to see if I can get any vibration but it doesn't work.
I will say that I kinda stripped the left bolt hole on the left side where the yellow cable is attached. Was thinking that maybe the stripped hole could be the issue. The vibrating motor was working perfectly before the swap.
I will say that I kinda stripped the left bolt hole on the left side where the yellow cable is attached. Was thinking that maybe the stripped hole could be the issue. The vibrating motor was working perfectly before the swap.
Sponsored