Will this setup rub if I'm lowered?

[Heavy Foot]

I've purchased some Work Meister s1 3p's and the rear is 19x10.5 +30. The tire size will be 305 30 R19's. The Volk Te37's are 5mm less poke. Does anybody that is running 19x10.5 +35 wish their wheels had a 5mm spacer to push the wheel out?

Sponsored

 

[Thraxbert]

It's gonna be very close. If I were in your position, I'd probably do 295 tire to keep +30, or +35 to keep the 305.

If you want flush fitment, 295/30 will definitely look better than 305/35. But your original 305/19+30 is really gonna come down to how low you are. The sidewall will be very close to the lip on the fender liner where it hooks into the fender if you get low enough.

//edit: 295 is also a better fit for a 10.5 wheel. 305 has sidewall bulge that will make your fitment harder than it needs to be if you want +30.

 

[Heavy Foot]

It's gonna be very close. If I were in your position, I'd probably do 295 tire to keep +30, or +35 to keep the 305.

If you want flush fitment, 295/30 will definitely look better than 305/35. But your original 305/19+30 is really gonna come down to how low you are. The sidewall will be very close to the lip on the fender liner where it hooks into the fender if you get low enough.

//edit: 295 is also a better fit for a 10.5 wheel. 305 has sidewall bulge that will make your fitment harder than it needs to be if you want +30.

I appreciate your input. I was hoping to move the 275 from the rear to the new 19x9.5 front, and buy two 305 30 19's for the rear.

 

[black_sedan]

I think it will work. My rears are 19x11 with a 305/30. Offset is in the 35-38 range and no issues with rub.

Sponsored