Enkei GTC02 18x10.5 +35 paired with 295/40/18 falken rt660s Square Setup. Will I rub?

[ddsupra]

Hello fellas, I have purchased a square set of Enkei GTC02 18x10.5 +35 and HKS springs w/ the adjustable tophat to clear my future tire setup. I was anticipating a 295/35/18 falken rt660 tire setup, however I can only find a 40 sidewall for a 295 width. My question is, will I rub if I run the HKS springs and 40 sidewall rt660s?
From what I've seen on the internet, I shouldn't have a problem with a 295/35/18 setup with a +35 offset, but I am not an expert.

My use case is daily, roll racing, and 1 track day per month.

Current setup is ~500whp:
Stock wheels - Stock front tires & 295/35/19 r888rs in the rear
Engine - Ecutek, Reflex, flex fuel, CTS chargepipe and intake, port injection 1050cc

Planning on upgrading turbo and cooling system when the time comes.

Sponsored

 

[razorlab]

I ran the exact same wheel with 295/35/18 Conti Forces on track with zero rubbing at. I did have -3.4 front camber however and only lowered .5"

 

[Batlwagn]

Short answer is no. But you can't be stupid low either or it will rub the fender liners

 

[garudathree]

it'll destroy your liners unless your reform them to fit. i've done this with vr-1s

 

[Tiko]

Hello fellas, I have purchased a square set of Enkei GTC02 18x10.5 +35 and HKS springs w/ the adjustable tophat to clear my future tire setup. I was anticipating a 295/35/18 falken rt660 tire setup, however I can only find a 40 sidewall for a 295 width. My question is, will I rub if I run the HKS springs and 40 sidewall rt660s?
From what I've seen on the internet, I shouldn't have a problem with a 295/35/18 setup with a +35 offset, but I am not an expert.

My use case is daily, roll racing, and 1 track day per month.

Current setup is ~500whp:
Stock wheels - Stock front tires & 295/35/19 r888rs in the rear
Engine - Ecutek, Reflex, flex fuel, CTS chargepipe and intake, port injection 1050cc

Planning on upgrading turbo and cooling system when the time comes.

Hey Adam, can you give us an update on the set up. I am getting ready to order the same square set up. I have the RSR super downs that i want to install with the wheels but im worried it will too low.

 

[jonezj]

Curious to hear if those 295/40/18s worked out

Sponsored