What did you do to your Supra today?

[dethred]

Does it match well/fit well?

About as well as fake and real carbon can match. Fitment is difficult but overall it's a huge improvement. Car should have come this way.

 

[AustinGRSupra]

~ Okay now revised to a Factory Toyota/Lexus cup holder ashtray.

This one is the perfect fit, a wide opening, sits flush with the armrest and very secure in the cup holder.

Truly looks Factory intended and about $25. Will work great to hold spare change, etc. See part number below:

nicely done, mate. It looks I finally have an ashtray Smoke ‘em if you got ‘em!

 

[Supraboi7]

About as well as fake and real carbon can match. Fitment is difficult but overall it's a huge improvement. Car should have come this way.

Wait the carbon is fake? I thought it was real but the weave was slightly different

 

[dethred]

Wait the carbon is fake? I thought it was real but the weave was slightly different

I'm not 100% sure, but the center console stock pattern doesn't quite look like the real thing. Looks like its hydro dipped, but I could very well be wrong. The parts I added are absolutely carbon though. The color match isn't 100%, despite the same twill, but you have to look closely. I guess that's the primary reason I think the oem part is hydro dipped. Overall it's way worth it to cover up the piano black garbage, and they just lowered the price to $255, mine was around $315 shipped.??‍

 

[MannyC224]

Installed skid plates this week. About a 3 hour install as some of the screws were difficult to reach. https://speedindustry.com/protekt-custom-front-bumper-skid-plate-20-toyota-supra

 

[Paolo]

Just washed the Supra.
Yay

Did the windows with rain X and the tires and rubber door frames with these 2 products.

Highly highly recommended.

Now I need a beer and time to relax. My arms are dead. ?

 

[Andrew4Supra]

Installed skid plates this week. About a 3 hour install as some of the screws were difficult to reach.

~ I’m assuming you are screwing the skid plate into the factory lower air dam to adhere or attach?

Not sure if I would want to alter the factory bumper by screwing directly into it.

Looks like a quality skid plate for the needed protection.

 

[Cruzifer]

Drove my Supra to work, it’s 30 degrees out, hope she isn’t to mad at me when it’s time to go home lol.

 

[ImTired]

Did you have any problems with the charge pipe install? I thought I read in a few places that some people did. I've been waiting to install mine until the weather warms up. Appreciate your input.

The install was easy once all the intake pieces are taken off. It reuses the factory wire clip on the bottom and 2 new screws by the throttle body. The hardest part really was wiggling the factory charge pipe out since it's one piece and has a giant unused clip hanging off of it.

 

[Ihernandez7910]

Cup holder delete.

 

[SunbirdGTO]

The install was easy once all the intake pieces are taken off. It reuses the factory wire clip on the bottom and 2 new screws by the throttle body. The hardest part really was wiggling the factory charge pipe out since it's one piece and has a giant unused clip hanging off of it.

Great. Thank you.

 

[Andrew4Supra]

Added the Rexpeed Carbon Fiber steering wheel insert. Nice to fill the large blank area and ties in the center console trim.

The kit also came with the emblem insert (since removed) ... for the weave is off and appears to be trying too hard in my opinion. ?

Some comparisons for reference.

The lower one looks fantastic to me. ?

 

[peppersam740]

How did you remove the old insert on the airbag cover ?

 

[Andrew4Supra]

How did you remove the old insert on the airbag cover ?

~ It’s actually an overlay and adheres with the attached thin double sided 3M tape on the back of the new CF piece.

 

[peppersam740]

~ It’s actually an overlay and adheres with the attached thin double sided 3M tape on the back of the new CF piece.

My mistake. I was referring to the Toyota logo