What did you do to your Supra today?

[ikingkhaos]

Finally threw on the eibach pro kit along with 15mm spacers in the rear. Unfortunately the only issue I had was with the stud conversion kit I purchased from Motorsport Hardware. 3 studs had wonky threads, and the shop I went to didn’t have the proper die to rethread them. So now I wait to throw in my 13mm spacers up front. Other than that. I am beyond satisfied with the stance of this car.

 

[TYMBOM]

Silver TPMS just would not do. Quick anodizing and ?. Details matter.

 

[LinkMK5]

Got some small goodies for the car. Next up, Active Autowerke downpipe and FTP charge pipe. Will be powder coating the Cusco harness bar to match the Tanabe front strut braces.

 

[Deighvid]

Aeroluxe TRD style carbon spoiler

FI exhaust (changing the tips to Titanium)

 

[Patina]

I did a few small mods while doing Tada's sound mod, thanks Tada for your great write-up
I installed a pocket-net between the seats and the trunk and, inspired by a Porsche Cayman I used to own, a net on the rear shelf as well as a safety bar for any potential luggage I will keep there.

Working my way through this thread and I was wondering if you have a link on where you got that net you used for the area behind the seats?

 

[JRedMKV]

Installed the Rexpeed carbon fiber door sills and side mirrors. Perfect fit on the door sills and they look great to me. The mirrors look great and really help to eliminate the blind spots but it’s gonna take getting used to. Also, on the driver side there is one wire that ends up not having any place to plug on the new mirrors and I don’t know what it’s for. Other than that install was easy. Thank you to Eddy from @Suma Performance for helping me get these at a pretty good price. Great customer service from @Suma Performance! Welcome to the forum.

 

[SD_MK]

These remind me of the MKIV supra, is that what we're going for here?

It's really to make the car NOT look like it has a dot nose like those shitty happy faces we used to draw as kids lol. But really, it's just to give it that cleaner look, the glass badge look got played out with every model toyota car coming with it.

 

[Sub-MkV]

Installed the Rexpeed carbon fiber door sills and side mirrors. Perfect fit on the door sills and they look great to me. The mirrors look great and really help to eliminate the blind spots but it’s gonna take getting used to. Also, on the driver side there is one wire that ends up not having any place to plug on the new mirrors and I don’t know what it’s for. Other than that install was easy. Thank you to Eddy from @Suma Performance for helping me get these at a pretty good price. Great customer service from @Suma Performance! Welcome to the forum.

How was the difficulty of the mirror install? I have the GR ones coming

 

[Sub-MkV]

All around?

The front is 9.5/22 with stock 255's

 

[JRedMKV]

How was the difficulty of the mirror install? I have the GR ones coming

Very easy. Just put some painters tape on the bottom edge of the mirror housing to protect the paint then get a plastic trim removal tool and just pry the old mirror out. Undo the stock wiring and plug the new one back in.

 

[SupraDC]

Very easy. Just put some painters tape on the bottom edge of the mirror housing to protect the paint then get a plastic trim removal tool and just pry the old mirror out. Undo the stock wiring and plug the new one back in.

I can attest to this. I just swapped back on the glossy CF mirror caps for the red ones. Pop from the top, you will feel like you're to going to break it! But they pop out easily. Ten seconds!

 

[BG500]

Working my way through this thread and I was wondering if you have a link on where you got that net you used for the area behind the seats?

hi this is the one I used, (leftover from my previous car) it comes without mounting hardware so you will need to purchase that as well
net : https://www.ebay.com/itm/274366718903
mounting hardware : https://www.ebay.com/itm/324631790921

I also have smaller nets mounted on the rear bulkhead behind the seats, similar to ebay item 203746825406

 

[Powaup]

Got some goodies to install (Tanabe front strut brace, HKS full carbon intake Blackline dress up bits, did a full detail plus steam cleaning of the engine bay and wheel wells, then met up with my buddy Matt in his new to him Turbo S to go get hot pot in Bellevue.

how are you liking the HKS intake?

 

[BG500]

Installed new ebay spoiler and rear badge. Ran out of time, so front badge goes on tomorrow. Also installed a new start button.

looks great, could you please share a link to the badge listing?

 

[Nitroturtle]

looks great, could you please share a link to the badge listing?

It took some waiting, as they aren't always available. Looks like there are a few limited colors still in stock.

https://www.americanpandadesign.com/product-page/a90-supra-badge-kit