What did you do to your Supra today?

[romanLegion9574]

Do they eliminate it at 90+mph?

They don't. It comes back at those speeds on the track.

AMS was still working brilliantly at 150 on the track.

 

[Evolution]

My AMS wind buffeting things (carbon if it matters) have been tested to 140mph with the windows down. All good here.

 

[underdonk]

Do they eliminate it at 90+mph?

Yes. Windows all the way down, up to about 140mph, and I haven't noticed it, with the caveat that I'm typically concentrating on other things (and have a helmet on). Was doing some runs for JB4 tuning this AM and didn't experience it at 100mph-ish. Totally on a closed track.

 

[irixyoctane]

I used a product in a manner other than intended and ended up with a furry carbon fiber mirror cap. This is some chapped strand carbon fiber that is really meant for bulking, but I wanted to see what else I could do with it. Did a wet layup under vacuum and this is what popped out. The plan is to eventually sand it back down then clear coat it. Hopefully end up with some neat carbon fiber marbling similar to how my WC Latheworks shift nob came out. It looked so funny I just had to pop it on the car for a pic.

 

[underdonk]

I used a product in a manner other than intended and ended up with a furry carbon fiber mirror cap. This is some chapped strand carbon fiber that is really meant for bulking, but I wanted to see what else I could do with it. Did a wet layup under vacuum and this is what popped out. The plan is to eventually sand it back down then clear coat it. Hopefully end up with some neat carbon fiber marbling similar to how my WC Latheworks shift nob came out. It looked so funny I just had to pop it on the car for a pic.

I'm dying ?

 

[irixyoctane]

I'm dying ?

I know, right? I'm trying to be all serious and get into the carbon fiber production business, but keep ending up with waka waka BS.

 

[J29DB03]

Do they eliminate it at 90+mph?

Yes. 100+mph.

 

[SD_MK]

I'd rock that.

 

[ta70raiii]

Popped on an Eventuri carbon fiber engine cover. Matching intake is coming soon!

 

[A90.C]

I felt the same way until I got the AWE ones. I -thought- the buffeting was gone, not it's really gone.

Gone enough to hear the counts on 50 rolls, we chillin

 

[Matthewstorm]

I used a product in a manner other than intended and ended up with a furry carbon fiber mirror cap. This is some chapped strand carbon fiber that is really meant for bulking, but I wanted to see what else I could do with it. Did a wet layup under vacuum and this is what popped out. The plan is to eventually sand it back down then clear coat it. Hopefully end up with some neat carbon fiber marbling similar to how my WC Latheworks shift nob came out. It looked so funny I just had to pop it on the car for a pic.

That looks Fred Flintstone.

 

[Matthewstorm]

They don't. It comes back at those speeds on the track.

AMS was still working brilliantly at 150 on the track.

Do you have a link for the AWS? I did the Google and came up nada.

 

[Cbklax3]

Do you have a link for the AWS? I did the Google and came up nada.

Google ‘AMS Wind Buffet’ and it’ll be the first link

 

[Matthewstorm]

Yes, just tried that and it worked. But then I found these.
https://www.ebay.com/itm/3637426978...tftk3qgrdq&var=&widget_ver=artemis&media=COPY

 

[Cbklax3]

Yes, just tried that and it worked. But then I found these.
https://www.ebay.com/itm/3637426978...tftk3qgrdq&var=&widget_ver=artemis&media=COPY

AMS makes CF versions, both matte and gloss. Assuming gloss should match the mirror caps but someone else would need to chime in.