What did you do to your Supra today?

[jtsang25]

Would’ve be done yesterday, but didn’t have a T60.

Overall, great steering wheel, and very easy install.

If you are running BM3 CustomRom, The only drawback is the inability to switch maps or check for E content from the steering wheel.

I thought this came with two programmable buttons. Can't you program it to switch maps?

 

[STi_to_GRzupra]

I thought this came with two programmable buttons. Can't you program it to switch maps?

Yes. Theres a separate harness for the FTU buttons, I would need to figure that out. Or email JQ WERKS for guidance. The up/dw switch works only for cruise control. For now, I will just drive the car and enjoy it, specially after several weeks of not being able to drive it.

BTW, trying to get that airbag assembly out was a real pain in the ass. It took a lot of patience.

 

[jtsang25]

Yes. Theres a separate harness for the FTU buttons, I would need to figure that out. Or email JQ WERKS for guidance. The up/dw switch works only for cruise control. For now, I will just drive the car and enjoy it, specially after several weeks of not being able to drive it.

BTW, trying to get that airbag assembly out was a real pain in the ass. It took a lot of patience.

Ya i switched to a carbon wheel. Not sure if I have the patience to switch again haha

 

[Avarela99]

Would’ve be done yesterday, but didn’t have a T60.

Overall, great steering wheel, and very easy install.

If you are running BM3 CustomRom, The only drawback is the inability to switch maps or check for E content from the steering wheel.

I’m pretty sure I’m stating the obvious but you no longer have an airbag with that wheel… so if you get into an accident god forbid that’s probably not ideal. It def looks cool but that’s a big safety concern man

 

[FLtrackdays]

Are those the 18x10” ET30?

Yessir! I had to look at an old receipt. They’ve been fantastic for track. I thought they were SM-10 (the newest version). Same size 18x10”

https://apexwheels.com/fitment-guides/toyota/supra/toyota-gr-supra-wheel-and-tire-fitment-guide

I’d love to get the VS-5RS’s someday and use my current ones as spares.

I’m pretty sure I’m stating the obvious but you no longer have an airbag with that wheel… so if you get into an accident god forbid that’s probably not ideal. It def looks cool but that’s a big safety concern man

No need for an airbag with a racing seat and harness. For those usually doing that ?

 

[CFactor]

New wing installed. Also did water spot removal and some paint cleanup.

Next Tuesday my new Maxton lip kit gets wrapped in satin black vinyl. Roof, b pillars and partial front bumper are getting gloss black PPF wrap.

Lip kit install should be in a couple weeks.

 

[Vertex]

Installed a few things:

Verus Turbo Heat Shield
Verus turbo resonator delete
AMS Wind Buffeting Kit (Gloss Black)

One of the wind deflectors isn't as flush as it could be, might see if I can remove it (heat gun + fishing line I guess?) and re-apply it with some new tape.

What did you end up putting over the back of the air box where that carbon filter/box was?

 

[Fontana]

Got the H&R springs fitted and loving the height. Anyone else running a mild spacer on the back for the TE37 A90 spec? Front is perfect fitment, I feel like rears can be a bit more aggressive.

 

[Flann-man]

Yesterday, but did a few visual mods, courtesy of my amazing wife’s Christmas presents!
Seen here: https://www.supramkv.com/threads/official-cu-later-gray-supra-club-thread.14504/post-326891

 

[Jmanlevan]

Got the H&R springs fitted and loving the height. Anyone else running a mild spacer on the back for the TE37 A90 spec? Front is perfect fitment, I feel like rears can be a bit more aggressive.

ADRO kit looks great my friend! Any plans to add their swan neck wing?

 

[Flann-man]

What did you end up putting over the back of the air box where that carbon filter/box was?

He used the versus intake resonator delete.
It’s a cap that goes over the open hole once you remove the resonator. I did the same.
you can see the same cap in his photo of the heat shield.

 

[Fontana]

ADRO kit looks great my friend! Any plans to add their swan neck wing?

Thanks mate!
I’m actually going with the Seibon MB style colour matched, I think it suits the body lines a bit more personally

 

[Mimosa]

Wheels came in today:

 

[TSmkV]

Bleated Christmas arrival from my awesome wife (the cover…not the car ?). And my son surprised me with a DeWalt 891 20V 1/2” impact wrench. God l love it when they get out of college and start working!

 

[TSmkV]

Wheels came in today:

Sweet…awaiting pics on car!