What did you do to your Supra today?

[Isaleus]

Verus diff cooler, Verus Heat shield and Verus Master Cylinder brace. All in prep for many track days this year.

I didnt think the brake brace would make that much of a difference. Brake feels waaayyyy different.

also rip the torx bit that now lives at the bottom of the engine bay.

 

[sabrownfl]

Removed the paint transfer from Tuesday nights brush with the garge door frame. Still needs a good polish to restore the luster, but at least it is back to black.

 

[garudathree]

Took off the Toyota badge and found this underneath

 

[Jmanlevan]

Big day for my Supra. Lots of new parts installed!! I have never modified a car with performance/mechanical mods before, only cosmetics!

HKS Intake with the fully enclosed carbon box, Active Autowerke downpipe, AWE Track edition exhaust with diamond black tips, H&R lowering springs, Variant Maxim wheels and Michelin PS4S tires. And a Meme!

 

[Syeeee]

Took off the Toyota badge and found this underneath

That paint... D:

 

[BMWAF]

Big day for my Supra. Lots of new parts installed!! I have never modified a car with performance/mechanical mods before, only cosmetics!

HKS Intake with the fully enclosed carbon box, Active Autowerke downpipe, AWE Track edition exhaust with diamond black tips, H&R lowering springs, Variant Maxim wheels and Michelin PS4S tires. And a Meme!

Where did you get that carbon fiber ass from?

 

[Jmanlevan]

Where did you get that carbon fiber ass from?

all my exterior carbon fiber is STEK Dynocarbon gloss PPF! ?

 

[BMWAF]

all my exterior carbon fiber is STEK Dynocarbon gloss PPF! ?

Ah ok cool. Looks great. Thanks for letting me know.

 

[Jmanlevan]

Ah ok cool. Looks great. Thanks for letting me know.

No problem! Thanks! It's not for everyone. Some people might think of it as a poser type of thing but I just like the look of carbon fiber but don't have the abundance of money nor the desire to maintain/take care of/replace real exterior carbon i.e. cracked front splitters. Especially since my car is a street car and I'll never benefit from the actual weight savings of real exterior carbon fiber parts. My engine bay pieces and interior pieces are real CF however. The overall consensus is that people love the dynocarbon gloss PPF as they mistake it for real CF and even after I tell them it is just PPF they have a hard time believing it because the film is pretty damn convincing and does look that real due to its depth and clarity.

 

[BMWAF]

No problem! Thanks! It's not for everyone. Some people might think of it as a poser type of thing but I just like the look of carbon fiber but don't have the abundance of money nor the desire to maintain/take care of/replace real exterior carbon i.e. cracked front splitters. Especially since my car is a street car and I'll never benefit from the actual weight savings of real exterior carbon fiber parts. My engine bay pieces and interior pieces are real CF however. The overall consensus is that people love the dynocarbon gloss PPF as they mistake it for real CF and even after I tell them it is just PPF they have a hard time believing it because the film is pretty damn convincing and does look that real due to its depth and clarity.

Nice. Who cares what people think, as long as you're happy that's all that really matters. I was considering going the full Andro kit but in my opinion, the rear end needs carbon to match the front and sides, so was curious about your build.

Do you have any issues with the PPF warping or melting around the exhausts?

 

[Rensuhlo]

Installed new seat. Harness tomorrow

 

[Jmanlevan]

Nice. Who cares what people think, as long as you're happy that's all that really matters. I was considering going the full Andro kit but in my opinion, the rear end needs carbon to match the front and sides, so was curious about your build.

Do you have any issues with the PPF warping or melting around the exhausts?

I thought the same thing about the ADRO kit and would have the real carbon pieces wrapped in the PPF to match exactly. I didn’t have issues with it melting with the stock exhaust. These new AWE tips are much closer to the diffuser so we’ll see. So far so good after a short 45 min drive today though.

 

[Jmanlevan]

@BMWAF patiently waiting for you to post pics of that ADRO wing installed!

 

[BMWAF]

@BMWAF patiently waiting for you to post pics of that ADRO wing installed!

Hahaha.. yes. I'm patiently waiting for 20 seconds break to do it. Hopefully this weekend!

 

[Jmanlevan]

I'm torn because I love the looks of that wing. It's my favorite one but I also really love the silhouette of my car with the duckbill spoiler on. And I feel like since my duckbill has got the two points, the ADRO front splitter with its two pointy portions would tie in nicely. Did you get the full kit or just the wing?