18in on 275/40, will it fit?

[Coqui]

Lowered on H&R, currently running 19x9.5 +25 with 275/35 on front. New setup on way, 18x10+25 front, 18x11 +34 rear TE37 Saga S Plus. Seen many with 275/35 with eibach springs on front. Since H&R aren’t as low, figured there be a larger wheel gap on 35s, can I run 40s with no rubbing? Thanks

https://www.willtheyfit.com/index.p...t2=40&wheel_size=18&wheel_width=10&offset2=25

Sponsored

 

[rwense]

Most likely yes. I ran 275/40 square on an 18.10.7 setup with the eibach US springs but would rub on track. It was much better running that setup with the HKS HAS springs set to their default ride height.

 

[Coqui]

Most likely yes. I ran 275/40 square on an 18.10.7 setup with the eibach US springs but would rub on track. It was much better running that setup with the HKS HAS springs set to their default ride height.

got any pics of the setup?

 

[ky.supra]

I think you'll clear the fronts with your new setup.

I ran 18x10 +36 on 275/40/18 square on ECS02 with 5mm spacers all around on HKS adjustable springs (default height, out the box settings)

 

[rwense]

got any pics of the setup?

I should add, spacers are needed upfront for it to fit with the eibach springs. But tbh they're way too soft and you need more negative camber for it to not rub at all. I mis-remembered and you can see where the tire contacts rhe hood on compressions.

 

[Coqui]

@rwense what was your offset?

 

[rwense]

@rwense what was your offset?

+38

 

[Coqui]

+25 shouldn’t need spacer for 275/40 @rwense @ky.supra but definitely more poke than yall with spacer. Haven’t been able to find anyone w similar setup on H&R yet

Sponsored