Pics & Vids of Supra with aftermarket wheels

[AhmadA90]

Updated pics by a pro

 

[Mark5825]

Looking amazing!

Any mods needed to fit? What are you lowered on?

Just on H&R Springs. There's a slight rub against the inside carpet on the rear on big high speed dips but I've only felt it a couple times in 500 miles, seems to be fine.

 

[cutsman]

Recently got some wheels. Fronts - 19 x 9.5, +22 offset with 275/30/19 tires,Rears - 19 x 11.0, +35 offset with 305/30/19 tires. Sitting on H&R springs. Overall fitment is good, but I always slightly rub when going up my driveway. Speed bumps are fine with no rubbing as well as driving.

 

[yfeghhi]

Updated pics by a pro

What are the specs on these?? looks really good

 

[Meraki Autoworks]

Customer with a set of Titan7 TS5!

-Josh

 

[Ultimateone]

Customer with a set of Titan7 TS5!

-Josh

specs?

 

[Meraki Autoworks]

specs?

19x9.5+34 / 19x11+40

-Josh

 

[yfeghhi]

Looking to get a little more info to try and get a set of wheels together. Looks like 19x10 in the front and 19x11 for the rear will be flush. Will be on H&R springs and im not trying to do any mods to make wheels and tires fit. What is the lowest offset to clear the brakes? Haven't seen any post on the lowest offset to clear them is so I can figure out what I want to end up with.

Previous car I had Work Emotion Kiwami wheels with offsets in the teens which was pretty aggressive and liked the look since they were super concave.

 

[Meraki Autoworks]

Looking to get a little more info to try and get a set of wheels together. Looks like 19x10 in the front and 19x11 for the rear will be flush. Will be on H&R springs and im not trying to do any mods to make wheels and tires fit. What is the lowest offset to clear the brakes? Haven't seen any post on the lowest offset to clear them is so I can figure out what I want to end up with.

Previous car I had Work Emotion Kiwami wheels with offsets in the teens which was pretty aggressive and liked the look since they were super concave.

Do you have a particular brand of wheels in mind? We can get you taken care of.

-Josh

 

[yfeghhi]

Do you have a particular brand of wheels in mind? We can get you taken care of.

-Josh

Thinking Work wheels again. Maybe same ones. Was also thinking put together a 3 piece wheel but a discontinued one so probably have to go through used route.

 

[Meraki Autoworks]

Thinking Work wheels again. Maybe same ones. Was also thinking put together a 3 piece wheel but a discontinued one so probably have to go through used route.

Lot of Work one piece wheels in stock if interested.

Can also help you get a custom set of JDM wheels from Work,SSR, etc..

-Josh

 

[Litebrite]

Anyone running 305/35r19 on rear lowered on springs? Not sure if it’s too tall of a tire.

 

[Waferz]

Anyone running 305/35r19 on rear lowered on springs? Not sure if it’s too tall of a tire.

@EastCoastSupra

 

[Dannyvandelft]

Anyone running 305/35r19 on rear lowered on springs? Not sure if it’s too tall of a tire.

It's almost an inch taller than a stock tire. You'll want a 305/30/19.

 

[Waferz]

It's almost an inch taller than a stock tire. You'll want a 305/30/19.

I disagree, 30 profile looks to thin and square compared to the fronts unless you run a 275/30 on the front. 265/35 and 305/35 would have been what I run if I would have went with 305. To each their own, but 305/35 is confirmed to fit with lowering springs.